Phone: 1-716-791-6197
Fax: 1-716-625-1312
Cart


 

Broach Key Seating Metric, Inch

Part Number:752-
Broach Key Seating Metric, Inch
Key Seating Broach High Speed Steel Metric and Imperial

Price

Your Price: $208.33
in stock

Order your item here! -------------Select it in the Box Below

Select Item
help
*We'll ask for shipping info at checkout

Description

Keyseating Broaches - Inch
CDTooling Keyseating pull broaches are manufactured similar to the Davis AF series cutters. Our cutter bars have 10° rake face, 5° back-off and 2° side-relief on all teeth. These broaches may be used on Davis model 4, 5, and 15 machines. Sizes range from 1/16" to 1" and 4 mm to 25 mm. For special applications contact our customer service.
EDP No. BroachSize Keyway Width Tolerance Body Width Body Height Body Length Minimum Length of Cut Maximum Length of Cut  
10701 1/16" .0625" - .0635" 3/16" 3/8" 16" 5/8" 1 7/8"  
10702 3/32" .0937" - .0947" 3/16" 3/8" 16" 5/8" 1 7/8"  
                 
10703 1/8" .1252" - .1262" 3/16" 7/8" 16" 5/8" 1 7/8"  
                 
10704 5/32" .1564" - .1574" 3/16" 1/2" 16" 5/8" 1 7/8"  
                 
10705 3/16" .1877" - .1887" 3/16" 9/16" 16" 5/8" 1 7/8"  
                 
10706 3/16" .1877" - .1887" 3/16" 3/4" 20" 5/8" 3 1/8"  
                 
10707 1/4" .2502" - .2512" 1/4" 3/4" 16" 5/8" 1 5/8"  
                 
10708 1/4" .2502" - .2512" 1/4" 3/4" 20" 5/8" 3 1/8"  
                 
10709 5/16" .3127" - .3137" 5/16" 7/8" 16" 1 1/16" 3 3/16"  
                 
10710 5/16" .3127" - .3137" 5/16" 7/8" 20" 1 1/16" 5 3/16"  
                 
10711 3/8" .3755" - .3765" 3/8" 7/8" 16" 1 1/16" 3 3/16"  
                 
10712 3/8" .3755" - .3765" 3/8" 7/8" 20" 1 1/16" 5 3/16"  
                 
10713 7/16" .4380" - .4390" 7/16" 1" 16" 1 1/16" 5 3/16"  
                 
10714 7/16" .4380" - .4390" 7/16" 1" 20" 1 1/16" 5 3/16"  
                 
10715 1/2" .5006" - .5016" 1/2" 1" 20" 1 1/16" 5 3/16"  
                 
10716 9/16" .5630" - .5640" 9/16" 1" 20" 1 1/16" 5 3/16"  
                 
10717 5/8" .6260" - .6270" 5/8" 1" 20" 1 1/16" 5 3/16"  
                 
10718 3/4" .7515" - .7525" 3/4" 1" 20" 1 1/16" 5 3/16"  
                 
10719 7/8" .8765" - .8775" 7/8" 1" 20" 1 1/16" 5 3/16"  
                 
10720 1" 1.0015" - 1.0025" 1" 1" 20" 1 1/16" 5 3/16"  
                 
Keyseating Broaches - Metric
CDTooling HSS keyseating pull broaches are manufactured similar to the Davis AF series cutters. Our cutter bars have 10° rake face, 5° back-off and 2° side-relief on all teeth. These broaches may be used on Davis model 4, 5, and 15 machines. Sizes range from 1/16" to 1" and 4 mm to 25 mm. For special applications contact our customer service.
EDP No. BroachSize Keyway Width Tolerance Body Width Body Height Body Length Minimum Length of Cut Maximum Length of Cut  
                 
11701 2 mm .0787" - .0792" 3/16" 3/8" 16" 5/8" 1 7/8"  
                 
11702 3 mm .1181" - .1186" 3/16" 7/8" 16" 5/8" 1 7/8"  
                 
11703 4 mm .1575" - .1580" 3/16" 1/2" 16" 5/8" 1 7/8"  
                 
11704 5 mm .1968" - .1973" 5 mm 9/16" 20" 5/8" 1 7/8"  
                 
11705 5 mm .1968" - .1973" 5 mm 3/4" 16" 5/8" 3 1/8"  
                 
11706 6 mm .2362" - .2367" 6 mm 3/4" 20" 5/8" 1 7/8"  
                 
11707 6 mm .2362" - .2367" 6 mm 3/4" 16" 5/8" 3 1/8"  
                 
11708 8 mm .3150" - .3155" 8 mm 7/8" 20" 1 1/16" 3 3/16"  
                 
11709 8 mm .3150" - .3155" 8 mm 7/8" 16" 1 1/16" 5 5/16"  
                 
11710 10 mm .3937" - .3942" 10 mm 7/8" 20" 1 1/16" 5 5/16"  
                 
11711 10 mm .3937" - .3942" 10 mm 7/8" 20" 1 1/16" 5 5/16"  
                 
11712 12 mm .4724" - .4730" 12 mm 1" 20" 1 1/16" 5 5/16"  
                 
11713 14 mm .5512" - .5519" 14 mm 1" 20" 1 1/16" 5 5/16"  
                 
11714 16 mm .6299" - .6306" 16 mm 1" 20" 1 1/16" 5 5/16"  
                 
11715 18 mm .7087" - .7093" 18 mm 1" 20" 1 1/16" 5 5/16"  
                 
11716 20 mm .7874" - .7883" 20 mm 1" 20" 1 1/16" 5 5/16"  
                 
11717 22 mm .8661" - .8669" 22 mm 1" 20" 1 1/16" 5 5/16"  
                 
11718 14 mm .9449" - .9458" 24 mm 1" 20" 1 1/16" 5 5/16"  
                 
11719 25 mm .9843" - .9853" 25 mm 1" 20" 1 1/16" 5 5/16"  
                 

Feature:

condition: new

Feature 6

Broaching with Production Keyway Broaches

Broaching with Production Style Keyway Broaches requires no Shims or Bushings. The back and shoulders of the Broach are ground to fit the diameter of the bore, supporting and guiding itself while cutting the keyway in one pass. All individual stock Broaches have recommended Minimum and Maximum Length of Cut guidelines which should be followed. Workpieces may be stacked to establish the Minimum Length of Cut, or to improve the efficiency of the operation as long as Maximum Length of Cut is not exceeded. Proper nesting and clamping of stacked parts is vital when this approach is taken. The workpiece must be solidly fixed or nested perfectly square with the baseplate and ram face. Make sure all square and parallel surfaces on the face of the ram and baseplate remain true. It is essential to maintain a rigid set-up at all times and caution should be taken when stacking parts to maintain the integrity of the set-up. Never attempt to exceed the Broach's specified Maximum Length of Cut. Do not use a dull Broach, this may result in poor finish or damage to part and increases the danger of breakage. At the beginning of a cut, be sure the Broach is centered under the ram. Proper alignment is important. After the Broach starts to cut, back off pressure on the ram allowing the Broach to center itself, providing for better alignment. If the Broach moves out of alignment after starting cut, back off the pressure on the ram and align the broach itself. Repeat this procedure during successive cuts. This will assure a perfectly straight broached hole..

Select desired Broach and insert pilot into bore of part.
    Lubricate.
    Apply pressure to the Broach - back off pressure on the ram allowing the Broach to center itself, providing for better alignment. If the Broach moves out of alignment after starting cut, back off the pressure on the ram and align the broach itself - reapply pressure to push Broach through the work.
    Clean Broach using a stiff brush to remove chips from cutting section.
    Repeat steps 2 thru 4 for subsequent parts.


Related Items

 
 

Recently Viewed Items

Hello Guest | Log in!
Information
Browse by Category
Browse by Price