Phone: 1-716-791-6197
Fax: 1-716-625-1312
Cart


 

Chucking Reamer Inch, Decimal, Number, Letter Metric

Part Number:530-
Chucking Reamer Inch, Decimal, Number, Letter Metric
Chucking Reamer Inch, Decimal, Number, Letter, Metric

Price

Your Price: $18.64
Availabilty: In Stock

Order your item here! -------------Select it in the Box Below

Select Item for Price Information and Ordering
help
*We'll ask for shipping info at checkout

Description

Chucking Reamer Straight, Spiral Flute, Straight & Taper Shank

* Reamer & Drill Selection Procedures
Selecting the correct reamer diameter is not quite as simple as one might think. 

 Selecting the correct drill size is also important as doing so will prolong the life of 

your reamer and ensure proper size and finish. There are 3 steps involved in selecting

the correct reamer and drill size for your application:

1) Determine the correct reamer diameter based on total hole tolerance and the machine ability of your material.
2) Calculate the correct hole diameter needed prior to reaming,
3) Select the proper drill diameter to make that hole.
An example follows each step.
 

Step #1: 
To calculate the correct reamer diameter, based on the machine ability of the material to be reamed, 

deduct the allowances in the following table from the maximum finished hole size:

For example: If your finished hole size is .5000 with a -.0005 +.0000 tolerance, and the material is 

302 Stainless (which has a machine ability rating of 50) the chart shows that the range to deduct is. 0004-.0005.

.5000 -.0004 = .4996
.5000 -.0005 = .4995
Therefore, the best reamer size is .4995
 

 Machine ability
Rating
Total Hole Tol.30 or Less or Above 10031-100
.0005".0003-.0004.0004-.0005
.0010.0004-.0006.0006-.0008
.0015.0005-.0008.0008-.0010
.0020.0006-.0010.0010-.0014
.0030.0009-.0020.0009-.0020
.0040.0012-.0026.0012-.0026
.0050.0014-.0032.0014-.0032
.0060.0017-.0038.0017-.0038
.0070.0019-.0044.0019-.0044
.0080.0022-.0050.0022-.0050
.0090.0024-.0056.0024-.0056
.0100.0027-.0062.0027-.0062

Step #2: 
Based on the reamer selected in step # 1, the following table shows the amount of stock that should be 

removed by the reamer (leaving the recommended amount will ensure the best finish and tolerance):

Using the same example (finished hole size is .5000 with a -.0005 +.0000 tolerance, and the material is 

302 Stainless (which has a machine ability rating of 50): 

the chart shows that the amount to deduct from the reamer size is .007-.015.

4995 -.015 = .4845 
4995 -.007 = .4925 
Therefore, the best hole size before reaming is between .4845 and .4925 
 

 Machine ability
Rating
Diameter Range30 or Less  31 and Up
.0000-.0625.006-.010.003-.005
.0626-.1250.006-.010.004-.007
.1251-.2500.006-.010.005-.010
.2501-.5000.012-.020.007-.015
.5001-1.0000.012-.020.010-.020

Step #3: 
Based on the pre-reaming hole diameter selected in step # 2, the following table shows the oversize 

allowance that should be deducted from the hole size to arrive at the correct drill size:

Using the same example (pre-reaming hole size is between .4845 and .4925 and the material is 

302 Stainless (which has a machine ability rating of 50): the chart shows that the 

amount to deduct from the Yankee reamer size is .0048. 

4845 -.0048 = .4797 
4925 -.0048 = .4877
Therefore, the best practical drill size is 31/64 (.4844) because it is between .4797 and .4877 

To recap: in this example you should use a 31/64 drill and a .4995  reamer.

 Machine ability
Rating
Diameter Range30 or Less or Above 10031-100
.0000-.0625.0005.0015
.0626-.1250.0006.0028
.1251-.1875.0008.0036
.1876-.2500.0008.0042
.2501-.5000.0010.0048
.5001-.7500.0012.0052
.7501-1.0000.0020.0065

Please note: All information contained in these pages is accurate to the best of our knowledge. 

Materials and conditions can vary, causing differences over which we have no control. 

Therefore, we cannot accept responsibility for your particular situation.

Feature 6

A summary of items listed on this page

5-015-001 Straight Shank Straight Flute Chucking Reamer 1/16 
5-015-002 Straight Shank Straight Flute Chucking Reamer, 5/64
5-015-003 Straight Shank Straight Flute Chucking Reamer, 3/32
5-015-004 Straight Shank Straight Flute Chucking Reamer, 7/64
5-015-005 Straight Shank Straight Flute Chucking Reamer, 1/8, 6F
5-015-010 Straight Shank Straight Flute Chucking Reamer, 9/64, 6F
5-015-015 Straight Shank Straight Flute Chucking Reamer, 5/32, 6F
5-015-020 Straight Shank Straight Flute Chucking Reamer, 11/64, 6F
5-015-025 Straight Shank Straight Flute Chucking Reamer, 3/16, 6F
5-015-030 Straight Shank Straight Flute Chucking Reamer, 13/64, 6F
5-015-035 Straight Shank Straight Flute Chucking Reamer, 7/32, 6F
5-015-040 Straight Shank Straight Flute Chucking Reamer, 15/64, 6F
5-015-045 Straight Shank Straight Flute Chucking Reamer, 1/4, 6F
5-015-050 Straight Shank Straight Flute Chucking Reamer, 17/64, 6F
5-015-055 Straight Shank Straight Flute Chucking Reamer, 9/32, 6F
5-015-060 Straight Shank Straight Flute Chucking Reamer, 19/64, 6F
5-015-065 Straight Shank Straight Flute Chucking Reamer, 5/16, 6F
5-015-070 Straight Shank Straight Flute Chucking Reamer, 21/64, 6F
5-015-075 Straight Shank Straight Flute Chucking Reamer, 11/32, 6F
5-015-080 Straight Shank Straight Flute Chucking Reamer, 23/64, 6F
5-015-085 Straight Shank Straight Flute Chucking Reamer, 3/8, 6F
5-015-090 Straight Shank Straight Flute Chucking Reamer, 25/64, 6F
5-015-095 Straight Shank Straight Flute Chucking Reamer, 13/32, 6F
5-015-100 Straight Shank Straight Flute Chucking Reamer, 27/64, 8F
5-015-105 Straight Shank Straight Flute Chucking Reamer, 7/16, 8F
5-015-110 Straight Shank Straight Flute Chucking Reamer, 29/64, 8F
5-015-115 Straight Shank Straight Flute Chucking Reamer, 15/32, 8F
5-015-120 Straight Shank Straight Flute Chucking Reamer, 31/64, 8F
5-015-125 Straight Shank Straight Flute Chucking Reamer, 1/2, 8F
5-015-130 Straight Shank Straight Flute Chucking Reamer, 33/64, 8F
5-015-135 Straight Shank Straight Flute Chucking Reamer, 17/32, 8F
5-015-140 Straight Shank Straight Flute Chucking Reamer, 35/64, 8F
5-015-145 Straight Shank Straight Flute Chucking Reamer, 9/16, 8F
5-015-150 Straight Shank Straight Flute Chucking Reamer, 37/64, 8F
5-015-155 Straight Shank Straight Flute Chucking Reamer, 19/32, 8F
5-015-160 Straight Shank Straight Flute Chucking Reamer, 39/64, 8F
5-015-165 Straight Shank Straight Flute Chucking Reamer, 5/8, 8F
5-015-170 Straight Shank Straight Flute Chucking Reamer, 41/64, 8F
5-015-175 Straight Shank Straight Flute Chucking Reamer, 21/32, 8F
5-015-180 Straight Shank Straight Flute Chucking Reamer, 43/64, 8F
5-015-185 Straight Shank Straight Flute Chucking Reamer, 11/16, 8F
5-015-190 Straight Shank Straight Flute Chucking Reamer, 45/64, 8F
5-015-195 Straight Shank Straight Flute Chucking Reamer, 23/32, 8F
5-015-200 Straight Shank Straight Flute Chucking Reamer, 47/64, 8F
5-015-205 Straight Shank Straight Flute Chucking Reamer, 3/4, 8F
5-015-210 Straight Shank Straight Flute Chucking Reamer, 49/64, 10F
5-015-215 Straight Shank Straight Flute Chucking Reamer, 25/32, 10F
5-015-220 Straight Shank Straight Flute Chucking Reamer, 51/64, 10F
5-015-225 Straight Shank Straight Flute Chucking Reamer, 13/16, 10F
5-015-230 Straight Shank Straight Flute Chucking Reamer, 53/64, 10F
5-015-235 Straight Shank Straight Flute Chucking Reamer, 27/32, 10F
5-015-240 Straight Shank Straight Flute Chucking Reamer, 55/64, 10F
5-015-245 Straight Shank Straight Flute Chucking Reamer, 7/8, 10F
5-015-250 Straight Shank Straight Flute Chucking Reamer, 57/64, 10F
5-015-255 Straight Shank Straight Flute Chucking Reamer, 29/32, 10F
5-015-260 Straight Shank Straight Flute Chucking Reamer, 59/64, 10F
5-015-265 Straight Shank Straight Flute Chucking Reamer, 15/16, 10F
5-015-270 Straight Shank Straight Flute Chucking Reamer, 61/64, 10F
5-015-275 Straight Shank Straight Flute Chucking Reamer, 31/32, 10F
5-015-280 Straight Shank Straight Flute Chucking Reamer, 63/64, 10F
5-015-285 Straight Shank Straight Flute Chucking Reamer, 1, 10F
5-015-290 Straight Shank Straight Flute Chucking Reamer, 1.1/32, 10F
5-015-295 Straight Shank Straight Flute Chucking Reamer, 1.1/16, 10F
5-015-300 Straight Shank Straight Flute Chucking Reamer, 1.3/32, 10F
5-015-305 Straight Shank Straight Flute Chucking Reamer, 1.1/8, 10F
5-015-310 Straight Shank Straight Flute Chucking Reamer, 1.5/32, 12F
5-015-315 Straight Shank Straight Flute Chucking Reamer, 1.3/16, 12F
5-015-318 Straight Shank Straight Flute Chucking Reamer, 1.7/32, 12F
5-015-320 Straight Shank Straight Flute Chucking Reamer, 1.1/4, 12F
5-015-325 Straight Shank Straight Flute Chucking Reamer, 1.5/16, 12F
5-015-330 Straight Shank Straight Flute Chucking Reamer, 1.3/8, 12F
5-015-335 Straight Shank Straight Flute Chucking Reamer, 1.7/16, 12F
5-015-340 Straight Shank Straight Flute Chucking Reamer, 1.1/2, 12F
5-015-345 Straight Shank Straight Flute Chucking Reamer, 1.9/16, 12F
5-015-350 Straight Shank Straight Flute Chucking Reamer, 1.5/8, 12F
5-015-355 Straight Shank Straight Flute Chucking Reamer, 1.11/16, 12F
5-015-360 Straight Shank Straight Flute Chucking Reamer, 1.3/4, 12F
5-015-365 Straight Shank Straight Flute Chucking Reamer, 1.7/8, 12F
5-015-370 Straight Shank Straight Flute Chucking Reamer, 2in, 14F
5-015-529 Chucking Reamers Set,29Pc 1/16-1/2w/Indx
5-016-005 Straight Shank Straight Flute Chucking Reamer Number Size #1, 6F
5-016-010 Straight Shank Straight Flute Chucking Reamer Number Size #2, 6F
5-016-015 Straight Shank Straight Flute Chucking Reamer Number Size #3, 6F
5-016-020 Straight Shank Straight Flute Chucking Reamer Number Size #4, 6F
5-016-025 Straight Shank Straight Flute Chucking Reamer Number Size #5, 6F
5-016-030 Straight Shank Straight Flute Chucking Reamer Number Size #6, 6F
5-016-035 Straight Shank Straight Flute Chucking Reamer Number Size #7, 6F
5-016-040 Straight Shank Straight Flute Chucking Reamer Number Size #8, 6F
5-016-045 Straight Shank Straight Flute Chucking Reamer Number Size #9, 6F
5-016-050 Straight Shank Straight Flute Chucking Reamer Number Size #10, 6F
5-016-055 Straight Shank Straight Flute Chucking Reamer Number Size #11, 6F
5-016-060 Straight Shank Straight Flute Chucking Reamer Number Size #12, 6F
5-016-065 Straight Shank Straight Flute Chucking Reamer Number Size #13, 6F
5-016-070 Straight Shank Straight Flute Chucking Reamer Number Size #14, 6F
5-016-075 Straight Shank Straight Flute Chucking Reamer Number Size #15, 6F
5-016-080 Straight Shank Straight Flute Chucking Reamer Number Size #16, 6F
5-016-085 Straight Shank Straight Flute Chucking Reamer Number Size #17, 6F
5-016-090 Straight Shank Straight Flute Chucking Reamer Number Size #18, 6F
5-016-095 Straight Shank Straight Flute Chucking Reamer Number Size #19, 6F
5-016-100 Straight Shank Straight Flute Chucking Reamer Number Size #20, 6F
5-016-105 Straight Shank Straight Flute Chucking Reamer Number Size #21, 6F
5-016-110 Straight Shank Straight Flute Chucking Reamer Number Size #22, 6F
5-016-115 Straight Shank Straight Flute Chucking Reamer Number Size #23, 6F
5-016-120 Straight Shank Straight Flute Chucking Reamer Number Size #24, 6F
5-016-125 Straight Shank Straight Flute Chucking Reamer Number Size #25, 6F
5-016-130 Straight Shank Straight Flute Chucking Reamer Number Size #26, 6F
5-016-135 Straight Shank Straight Flute Chucking Reamer Number Size #27, 6F
5-016-140 Straight Shank Straight Flute Chucking Reamer Number Size #28, 6F
5-016-145 Straight Shank Straight Flute Chucking Reamer Number Size #29, 6F
5-016-150 Straight Shank Straight Flute Chucking Reamer Number Size #30, 6F
5-016-155 Straight Shank Straight Flute Chucking Reamer Number Size #31, 6F
5-016-160 Straight Shank Straight Flute Chucking Reamer Number Size #32, 6F
5-017-005 Straight Shank Straight Flute Chucking Reamer Letter Size, A, 6F
5-017-010 Straight Shank Straight Flute Chucking Reamer Letter Size, B, 6F
5-017-015 Straight Shank Straight Flute Chucking Reamer Letter Size, C, 6F
5-017-020 Straight Shank Straight Flute Chucking Reamer Letter Size, D, 6F
5-017-025 Straight Shank Straight Flute Chucking Reamer Letter Size, E, 6F
5-017-030 Straight Shank Straight Flute Chucking Reamer Letter Size, F, 6F
5-017-035 Straight Shank Straight Flute Chucking Reamer Letter Size, G, 6F
5-017-040 Straight Shank Straight Flute Chucking Reamer Letter Size, H, 6F
5-017-045 Straight Shank Straight Flute Chucking Reamer Letter Size, I, 6F
5-017-050 Straight Shank Straight Flute Chucking Reamer Letter Size, J, 6F
5-017-055 Straight Shank Straight Flute Chucking Reamer Letter Size, K, 6F
5-017-060 Straight Shank Straight Flute Chucking Reamer Letter Size, L, 6F
5-017-065 Straight Shank Straight Flute Chucking Reamer Letter Size, M, 6F
5-017-070 Straight Shank Straight Flute Chucking Reamer Letter Size, N, 6F
5-017-075 Straight Shank Straight Flute Chucking Reamer Letter Size, O, 6F
5-017-080 Straight Shank Straight Flute Chucking Reamer Letter Size, P, 6F
5-017-085 Straight Shank Straight Flute Chucking Reamer Letter Size, Q, 6F
5-017-090 Straight Shank Straight Flute Chucking Reamer Letter Size, R, 6F
5-017-095 Straight Shank Straight Flute Chucking Reamer Letter Size, S, 6F
5-017-100 Straight Shank Straight Flute Chucking Reamer Letter Size, T, 6F
5-017-105 Straight Shank Straight Flute Chucking Reamer Letter Size, U, 6F
5-017-110 Straight Shank Straight Flute Chucking Reamer Letter Size, V, 6F
5-017-115 Straight Shank Straight Flute Chucking Reamer Letter Size, W, 6F
5-017-120 Straight Shank Straight Flute Chucking Reamer Letter Size, X, 6F
5-017-125 Straight Shank Straight Flute Chucking Reamer Letter Size, Y, 6F
5-017-130 Straight Shank Straight Flute Chucking Reamer Letter Size, Z, 6F
5-017-260 Chucking Rmrs Ltr Sizes,A-Z St In Mtl.Indx
5-018-123 Straight Shank Straight Flute Chucking Reamer Decimal Size .123, 6F
5-018-124 Straight Shank Straight Flute Chucking Reamer Decimal Size .124, 6F
5-018-1245 Straight Shank Straight Flute Chucking Reamer Decimal Size.1245, 6F
5-018-1247 Straight Shank Straight Flute Chucking Reamer Decimal Size.1247, 6F
5-018-1255 Straight Shank Straight Flute Chucking Reamer Decimal Size.1255, 6F
5-018-126 Straight Shank Straight Flute Chucking Reamer Decimal Size .126, 6F
5-018-1265 Straight Shank Straight Flute Chucking Reamer Decimal Size.1265, 6F
5-018-127 Straight Shank Straight Flute Chucking Reamer Decimal Size .127, 6F
5-018-128 Straight Shank Straight Flute Chucking Reamer Decimal Size .128, 6F
5-018-129 Straight Shank Straight Flute Chucking Reamer Decimal Size .129, 6F
5-018-1295 Straight Shank Straight Flute Chucking Reamer Decimal Size.1295, 6F
5-018-130 Straight Shank Straight Flute Chucking Reamer Decimal Size .130, 6F
5-018-137 Straight Shank Straight Flute Chucking Reamer Decimal Size .137, 6F
5-018-138 Straight Shank Straight Flute Chucking Reamer Decimal Size .138, 6F
5-018-140 Straight Shank Straight Flute Chucking Reamer Decimal Size .140, 6F
5-018-141 Straight Shank Straight Flute Chucking Reamer Decimal Size .141, 6F
5-018-1415 Straight Shank Straight Flute Chucking Reamer Decimal Size.1415, 6F
5-018-142 Straight Shank Straight Flute Chucking Reamer Decimal Size .142, 6F
5-018-147 Straight Shank Straight Flute Chucking Reamer Decimal Size .147, 6F
5-018-152 Straight Shank Straight Flute Chucking Reamer Decimal Size .152, 6F
5-018-156 Straight Shank Straight Flute Chucking Reamer Decimal Size .156, 6F
5-018-158 Straight Shank Straight Flute Chucking Reamer Decimal Size .158, 6F
5-018-164 Straight Shank Straight Flute Chucking Reamer Decimal Size .164, 6F
5-018-167 Straight Shank Straight Flute Chucking Reamer Decimal Size .167, 6F
5-018-172 Straight Shank Straight Flute Chucking Reamer Decimal Size .172, 6F
5-018-174 Straight Shank Straight Flute Chucking Reamer Decimal Size .174, 6F
5-018-175 Straight Shank Straight Flute Chucking Reamer Decimal Size .175, 6F
5-018-176 Straight Shank Straight Flute Chucking Reamer Decimal Size .176, 6F
5-018-177 Straight Shank Straight Flute Chucking Reamer Decimal Size .177, 6F
5-018-181 Straight Shank Straight Flute Chucking Reamer Decimal Size .181, 6F
5-018-182 Straight Shank Straight Flute Chucking Reamer Decimal Size .182, 6F
5-018-184 Straight Shank Straight Flute Chucking Reamer Decimal Size .184, 6F
5-018-1845 Straight Shank Straight Flute Chucking Reamer Decimal Size.1845, 6F
5-018-185 Straight Shank Straight Flute Chucking Reamer Decimal Size .185, 6F
5-018-1855 Straight Shank Straight Flute Chucking Reamer Decimal Size.1855, 6F
5-018-186 Straight Shank Straight Flute Chucking Reamer Decimal Size .186, 6F
5-018-1865 Straight Shank Straight Flute Chucking Reamer Decimal Size.1865, 6F
5-018-187 Straight Shank Straight Flute Chucking Reamer Decimal Size .187, 6F
5-018-1875 Straight Shank Straight Flute Chucking Reamer Decimal Size.1875, 6F
5-018-188 Straight Shank Straight Flute Chucking Reamer Decimal Size .188, 6F
5-018-1885 Straight Shank Straight Flute Chucking Reamer Decimal Size.1885, 6F
5-018-1895 Straight Shank Straight Flute Chucking Reamer Decimal Size.1895, 6F
5-018-190 Straight Shank Straight Flute Chucking Reamer Decimal Size .190, 6F
5-018-1905 Straight Shank Straight Flute Chucking Reamer Decimal Size.1905, 6F
5-018-191 Straight Shank Straight Flute Chucking Reamer Decimal Size .191, 6F
5-018-1915 Straight Shank Straight Flute Chucking Reamer Decimal Size.1915, 6F
5-018-192 Straight Shank Straight Flute Chucking Reamer Decimal Size .192, 6F
5-018-193 Straight Shank Straight Flute Chucking Reamer Decimal Size .193, 6F
5-018-194 Straight Shank Straight Flute Chucking Reamer Decimal Size .194, 6F
5-018-195 Straight Shank Straight Flute Chucking Reamer Decimal Size .195, 6F
5-018-196 Straight Shank Straight Flute Chucking Reamer Decimal Size .196, 6F
5-018-197 Straight Shank Straight Flute Chucking Reamer Decimal Size .197, 6F
5-018-198 Straight Shank Straight Flute Chucking Reamer Decimal Size .198, 6F
5-018-199 Straight Shank Straight Flute Chucking Reamer Decimal Size .199, 6F
5-018-200 Straight Shank Straight Flute Chucking Reamer Decimal Size .200, 6F
5-018-202 Straight Shank Straight Flute Chucking Reamer Decimal Size .202, 6F
5-018-2024 Straight Shank Straight Flute Chucking Reamer Decimal Size.2024, 6F
5-018-203 Straight Shank Straight Flute Chucking Reamer Decimal Size .203, 6F
5-018-205 Straight Shank Straight Flute Chucking Reamer Decimal Size .205, 6F
5-018-206 Straight Shank Straight Flute Chucking Reamer Decimal Size .206, 6F
5-018-207 Straight Shank Straight Flute Chucking Reamer Decimal Size .207, 6F
5-018-208 Straight Shank Straight Flute Chucking Reamer Decimal Size .208, 6F
5-018-209 Straight Shank Straight Flute Chucking Reamer Decimal Size .209, 6F
5-018-210 Straight Shank Straight Flute Chucking Reamer Decimal Size .210, 6F
5-018-211 Straight Shank Straight Flute Chucking Reamer Decimal Size .211, 6F
5-018-214 Straight Shank Straight Flute Chucking Reamer Decimal Size .214, 6F
5-018-215 Straight Shank Straight Flute Chucking Reamer Decimal Size .215, 6F
5-018-2155 Straight Shank Straight Flute Chucking Reamer Decimal Size.2155, 6F
5-018-216 Straight Shank Straight Flute Chucking Reamer Decimal Size .216, 6F
5-018-217 Straight Shank Straight Flute Chucking Reamer Decimal Size .217, 6F
5-018-218 Straight Shank Straight Flute Chucking Reamer Decimal Size .218, 6F
5-018-219 Straight Shank Straight Flute Chucking Reamer Decimal Size .219, 6F
5-018-220 Straight Shank Straight Flute Chucking Reamer Decimal Size .220, 6F
5-018-2211 Straight Shank Straight Flute Chucking Reamer Decimal Size.2211, 6F
5-018-227 Straight Shank Straight Flute Chucking Reamer Decimal Size .227, 6F
5-018-230 Straight Shank Straight Flute Chucking Reamer Decimal Size .230, 6F
5-018-231 Straight Shank Straight Flute Chucking Reamer Decimal Size .231, 6F
5-018-232 Straight Shank Straight Flute Chucking Reamer Decimal Size .232, 6F
5-018-234 Straight Shank Straight Flute Chucking Reamer Decimal Size .234, 6F
5-018-235 Straight Shank Straight Flute Chucking Reamer Decimal Size .235, 6F
5-018-236 Straight Shank Straight Flute Chucking Reamer Decimal Size .236, 6F
5-018-237 Straight Shank Straight Flute Chucking Reamer Decimal Size .237, 6F
5-018-238 Straight Shank Straight Flute Chucking Reamer Decimal Size .238, 6F
5-018-239 Straight Shank Straight Flute Chucking Reamer Decimal Size .239, 6F
5-018-240 Straight Shank Straight Flute Chucking Reamer Decimal Size .240, 6F
5-018-241 Straight Shank Straight Flute Chucking Reamer Decimal Size .241, 6F
5-018-242 Straight Shank Straight Flute Chucking Reamer Decimal Size .242, 6F
5-018-243 Straight Shank Straight Flute Chucking Reamer Decimal Size .243, 6F
5-018-244 Straight Shank Straight Flute Chucking Reamer Decimal Size .244, 6F
5-018-245 Straight Shank Straight Flute Chucking Reamer Decimal Size .245, 6F
5-018-246 Straight Shank Straight Flute Chucking Reamer Decimal Size .246, 6F
5-018-247 Straight Shank Straight Flute Chucking Reamer Decimal Size .247, 6F
5-018-2475 Straight Shank Straight Flute Chucking Reamer Decimal Size.2475, 6F
5-018-248 Straight Shank Straight Flute Chucking Reamer Decimal Size .248, 6F
5-018-2485 Straight Shank Straight Flute Chucking Reamer Decimal Size.2485, 6F
5-018-249 Straight Shank Straight Flute Chucking Reamer Decimal Size .249, 6F
5-018-2495 Straight Shank Straight Flute Chucking Reamer Decimal Size.2495, 6F
5-018-2505 Straight Shank Straight Flute Chucking Reamer Decimal Size.2505, 6F
5-018-251 Straight Shank Straight Flute Chucking Reamer Decimal Size .251, 6F
5-018-2515 Straight Shank Straight Flute Chucking Reamer Decimal Size.2515, 6F
5-018-252 Straight Shank Straight Flute Chucking Reamer Decimal Size .252, 6F
5-018-253 Straight Shank Straight Flute Chucking Reamer Decimal Size .253, 6F
5-018-254 Straight Shank Straight Flute Chucking Reamer Decimal Size .254, 6F
5-018-255 Straight Shank Straight Flute Chucking Reamer Decimal Size .255, 6F
5-018-256 Straight Shank Straight Flute Chucking Reamer Decimal Size .256, 6F
5-018-257 Straight Shank Straight Flute Chucking Reamer Decimal Size .257, 6F
5-018-258 Straight Shank Straight Flute Chucking Reamer Decimal Size .258, 6F
5-018-259 Straight Shank Straight Flute Chucking Reamer Decimal Size .259, 6F
5-018-260 Straight Shank Straight Flute Chucking Reamer Decimal Size .260, 6F
5-018-265 Straight Shank Straight Flute Chucking Reamer Decimal Size .265, 6F
5-018-269 Straight Shank Straight Flute Chucking Reamer Decimal Size .269, 6F
5-018-271 Straight Shank Straight Flute Chucking Reamer Decimal Size .271, 6F
5-018-276 Straight Shank Straight Flute Chucking Reamer Decimal Size .276, 6F
5-018-277 Straight Shank Straight Flute Chucking Reamer Decimal Size .277, 6F
5-018-280 Straight Shank Straight Flute Chucking Reamer Decimal Size .280, 6F
5-018-282 Straight Shank Straight Flute Chucking Reamer Decimal Size .282, 6F
5-018-283 Straight Shank Straight Flute Chucking Reamer Decimal Size .283, 6F
5-018-284 Straight Shank Straight Flute Chucking Reamer Decimal Size .284, 6F
5-018-286 Straight Shank Straight Flute Chucking Reamer Decimal Size .286, 6F
5-018-287 Straight Shank Straight Flute Chucking Reamer Decimal Size .287, 6F
5-018-289 Straight Shank Straight Flute Chucking Reamer Decimal Size .289, 6F
5-018-290 Straight Shank Straight Flute Chucking Reamer Decimal Size .290, 6F
5-018-292 Straight Shank Straight Flute Chucking Reamer Decimal Size .292, 6F
5-018-293 Straight Shank Straight Flute Chucking Reamer Decimal Size .293, 6F
5-018-294 Straight Shank Straight Flute Chucking Reamer Decimal Size .294, 6F
5-018-296 Straight Shank Straight Flute Chucking Reamer Decimal Size .296, 6F
5-018-299 Straight Shank Straight Flute Chucking Reamer Decimal Size .299, 6F
5-018-303 Straight Shank Straight Flute Chucking Reamer Decimal Size .303, 6F
5-018-305 Straight Shank Straight Flute Chucking Reamer Decimal Size .305, 6F
5-018-306 Straight Shank Straight Flute Chucking Reamer Decimal Size .306, 6F
5-018-307 Straight Shank Straight Flute Chucking Reamer Decimal Size .307, 6F
5-018-309 Straight Shank Straight Flute Chucking Reamer Decimal Size .309, 6F
5-018-310 Straight Shank Straight Flute Chucking Reamer Decimal Size .310, 6F
5-018-3105 Straight Shank Straight Flute Chucking Reamer Decimal Size.3105, 6F
5-018-311 Straight Shank Straight Flute Chucking Reamer Decimal Size .311, 6F
5-018-3115 Straight Shank Straight Flute Chucking Reamer Decimal Size.3115, 6F
5-018-312 Straight Shank Straight Flute Chucking Reamer Decimal Size .312, 6F
5-018-313 Straight Shank Straight Flute Chucking Reamer Decimal Size .313, 6F
5-018-3135 Straight Shank Straight Flute Chucking Reamer Decimal Size.3135, 6F
5-018-314 Straight Shank Straight Flute Chucking Reamer Decimal Size .314, 6F
5-018-3145 Straight Shank Straight Flute Chucking Reamer Decimal Size.3145, 6F
5-018-315 Straight Shank Straight Flute Chucking Reamer Decimal Size .315, 6F
5-018-316 Straight Shank Straight Flute Chucking Reamer Decimal Size .316, 6F
5-018-3165 Straight Shank Straight Flute Chucking Reamer Decimal Size.3165, 6F
5-018-317 Straight Shank Straight Flute Chucking Reamer Decimal Size .317, 6F
5-018-318 Straight Shank Straight Flute Chucking Reamer Decimal Size .318, 6F
5-018-319 Straight Shank Straight Flute Chucking Reamer Decimal Size .319, 6F
5-018-320 Straight Shank Straight Flute Chucking Reamer Decimal Size .320, 6F
5-018-322 Straight Shank Straight Flute Chucking Reamer Decimal Size .322, 6F
5-018-324 Straight Shank Straight Flute Chucking Reamer Decimal Size .324, 6F
5-018-325 Straight Shank Straight Flute Chucking Reamer Decimal Size .325, 6F
5-018-327 Straight Shank Straight Flute Chucking Reamer Decimal Size .327, 6F
5-018-328 Straight Shank Straight Flute Chucking Reamer Decimal Size .328, 6F
5-018-329 Straight Shank Straight Flute Chucking Reamer Decimal Size .329, 6F
5-018-330 Straight Shank Straight Flute Chucking Reamer Decimal Size .330, 6F
5-018-336 Straight Shank Straight Flute Chucking Reamer Decimal Size .336, 6F
5-018-337 Straight Shank Straight Flute Chucking Reamer Decimal Size .337, 6F
5-018-344 Straight Shank Straight Flute Chucking Reamer Decimal Size .344, 6F
5-018-349 Straight Shank Straight Flute Chucking Reamer Decimal Size .349, 6F
5-018-355 Straight Shank Straight Flute Chucking Reamer Decimal Size .355, 6F
5-018-359 Straight Shank Straight Flute Chucking Reamer Decimal Size .359, 6F
5-018-369 Straight Shank Straight Flute Chucking Reamer Decimal Size .369, 6F
5-018-373 Straight Shank Straight Flute Chucking Reamer Decimal Size .373, 6F
5-018-374 Straight Shank Straight Flute Chucking Reamer Decimal Size .374, 6F
5-018-3745 Straight Shank Straight Flute Chucking Reamer Decimal Size.3745, 6F
5-018-3755 Straight Shank Straight Flute Chucking Reamer Decimal Size.3755, 6F
5-018-376 Straight Shank Straight Flute Chucking Reamer Decimal Size .376, 6F
5-018-3765 Straight Shank Straight Flute Chucking Reamer Decimal Size.3765, 6F
5-018-377 Straight Shank Straight Flute Chucking Reamer Decimal Size .377, 6F
5-018-379 Straight Shank Straight Flute Chucking Reamer Decimal Size .379, 6F
5-018-380 Straight Shank Straight Flute Chucking Reamer Decimal Size .380, 6F
5-018-386 Straight Shank Straight Flute Chucking Reamer Decimal Size .386, 6F
5-018-388 Straight Shank Straight Flute Chucking Reamer Decimal Size .388, 6F
5-018-400 Straight Shank Straight Flute Chucking Reamer Decimal Size .400, 6F
5-018-407 Straight Shank Straight Flute Chucking Reamer Decimal Size .407, 6F
5-018-430 Straight Shank Straight Flute Chucking Reamer Decimal Size .430, 8F
5-018-432 Straight Shank Straight Flute Chucking Reamer Decimal Size .432, 8F
5-018-4355 Straight Shank Straight Flute Chucking Reamer Decimal Size.4355, 8F
5-018-4365 Straight Shank Straight Flute Chucking Reamer Decimal Size.4365, 8F
5-018-437 Straight Shank Straight Flute Chucking Reamer Decimal Size .437, 8F
5-018-4385 Straight Shank Straight Flute Chucking Reamer Decimal Size.4385, 8F
5-018-439 Straight Shank Straight Flute Chucking Reamer Decimal Size .439, 8F
5-018-441 Straight Shank Straight Flute Chucking Reamer Decimal Size .441, 8F
5-018-442 Straight Shank Straight Flute Chucking Reamer Decimal Size .442, 8F
5-018-443 Straight Shank Straight Flute Chucking Reamer Decimal Size .443, 8F
5-018-444 Straight Shank Straight Flute Chucking Reamer Decimal Size .444, 8F
5-018-448 Straight Shank Straight Flute Chucking Reamer Decimal Size .448, 8F
5-018-449 Straight Shank Straight Flute Chucking Reamer Decimal Size .449, 8F
5-018-455 Straight Shank Straight Flute Chucking Reamer Decimal Size .455, 8F
5-018-456 Straight Shank Straight Flute Chucking Reamer Decimal Size .456, 8F
5-018-482 Straight Shank Straight Flute Chucking Reamer Decimal Size .482, 8F
5-018-490 Straight Shank Straight Flute Chucking Reamer Decimal Size .490, 8F
5-018-497 Straight Shank Straight Flute Chucking Reamer Decimal Size .497, 8F
5-018-498 Straight Shank Straight Flute Chucking Reamer Decimal Size .498, 8F
5-018-499 Straight Shank Straight Flute Chucking Reamer Decimal Size .499, 8F
5-018-4995 Straight Shank Straight Flute Chucking Reamer Decimal Size.4995, 8F
5-018-501 Straight Shank Straight Flute Chucking Reamer Decimal Size .501, 8F
5-018-5015 Straight Shank Straight Flute Chucking Reamer Decimal Size.5015, 8F
5-018-502 Straight Shank Straight Flute Chucking Reamer Decimal Size .502, 8F
5-018-503 Straight Shank Straight Flute Chucking Reamer Decimal Size .503, 8F
5-018-504 Straight Shank Straight Flute Chucking Reamer Decimal Size .504, 8F
5-018-505 Straight Shank Straight Flute Chucking Reamer Decimal Size .505, 8F
5-018-524 Straight Shank Straight Flute Chucking Reamer Decimal Size .524, 8F
5-018-525 Straight Shank Straight Flute Chucking Reamer Decimal Size .525, 8F
5-018-526 Straight Shank Straight Flute Chucking Reamer Decimal Size .526, 8F
5-018-530 Straight Shank Straight Flute Chucking Reamer Decimal Size .530, 8F
5-018-550 Straight Shank Straight Flute Chucking Reamer Decimal Size .550, 8F
5-018-558 Straight Shank Straight Flute Chucking Reamer Decimal Size .558, 8F
5-018-559 Straight Shank Straight Flute Chucking Reamer Decimal Size .559, 8F
5-018-5615 Straight Shank Straight Flute Chucking Reamer Decimal Size.5615, 8F
5-018-569 Straight Shank Straight Flute Chucking Reamer Decimal Size .569, 8F
5-018-574 Straight Shank Straight Flute Chucking Reamer Decimal Size .574, 8F
5-018-584 Straight Shank Straight Flute Chucking Reamer Decimal Size .584, 8F
5-018-585 Straight Shank Straight Flute Chucking Reamer Decimal Size .585, 8F
5-018-586 Straight Shank Straight Flute Chucking Reamer Decimal Size .586, 8F
5-018-588 Straight Shank Straight Flute Chucking Reamer Decimal Size .588, 8F
5-018-605 Straight Shank Straight Flute Chucking Reamer Decimal Size .605, 8F
5-018-622 Straight Shank Straight Flute Chucking Reamer Decimal Size .622, 8F
5-018-624 Straight Shank Straight Flute Chucking Reamer Decimal Size .624, 8F
5-018-625 Straight Shank Straight Flute Chucking Reamer Decimal Size .625, 8F
5-018-6255 Straight Shank Straight Flute Chucking Reamer Decimal Size.6255, 8F
5-018-626 Straight Shank Straight Flute Chucking Reamer Decimal Size .626, 8F
5-018-630 Straight Shank Straight Flute Chucking Reamer Decimal Size .630, 8F
5-018-748 Straight Shank Straight Flute Chucking Reamer Decimal Size .748, 8F
5-018-749 Straight Shank Straight Flute Chucking Reamer Decimal Size .749, 8F
5-018-751 Straight Shank Straight Flute Chucking Reamer Decimal Size .751, 8F
5-018-758 Straight Shank Straight Flute Chucking Reamer Decimal Size .758, 8F
5-018-262 Straight Shank Straight Flute Chucking Reamer Decimal Size .262, 6F
5-019-030 Straight Shank Straight Flute Chucking Reamer Din 212, 2.5mm
5-019-040 Straight Shank Straight Flute Chucking Reamer DIN212 3mm, 6F
5-019-045 Straight Shank Straight Flute Chucking Reamer DIN212 3.2mm, 6F
5-019-050 Straight Shank Straight Flute Chucking Reamer DIN212 3.5mm, 6F
5-019-055 Straight Shank Straight Flute Chucking Reamer DIN212 4mm, 6F
5-019-060 Straight Shank Straight Flute Chucking Reamer DIN212 4.5mm, 6F
5-019-065 Straight Shank Straight Flute Chucking Reamer DIN212 5mm, 6F
5-019-067 Straight Shank Straight Flute Chucking Reamer DIN212 5.5mm, 6F
5-019-070 Straight Shank Straight Flute Chucking Reamer DIN212 6mm, 6F
5-019-072 Straight Shank Straight Flute Chucking Reamer DIN212 6.5mm, 6F
5-019-075 Straight Shank Straight Flute Chucking Reamer DIN212 7mm, 6F
5-019-077 Straight Shank Straight Flute Chucking Reamer DIN212 7.5mm, 6F
5-019-080 Straight Shank Straight Flute Chucking Reamer DIN212 8mm, 6F
5-019-082 Straight Shank Straight Flute Chucking Reamer DIN212 8.5mm, 6F
5-019-085 Straight Shank Straight Flute Chucking Reamer DIN212 9mm, 6F
5-019-087 Straight Shank Straight Flute Chucking Reamer DIN212 9.5mm, 6F
5-019-090 Straight Shank Straight Flute Chucking Reamer DIN212 10mm, 6F
5-019-092 Straight Shank Straight Flute Chucking Reamer DIN212 10.5mm, 6F
5-019-095 Straight Shank Straight Flute Chucking Reamer DIN212 11mm, 8F
5-019-097 Straight Shank Straight Flute Chucking Reamer DIN212 11.5mm, 8F
5-019-100 Straight Shank Straight Flute Chucking Reamer DIN212 12mm, 8F
5-019-102 Straight Shank Straight Flute Chucking Reamer DIN212 12.5mm, 8F
5-019-105 Straight Shank Straight Flute Chucking Reamer DIN212 13mm, 8F
5-019-107 Straight Shank Straight Flute Chucking Reamer DIN212 13.5mm, 8F
5-019-110 Straight Shank Straight Flute Chucking Reamer DIN212 14mm, 8F
5-019-112 Straight Shank Straight Flute Chucking Reamer DIN212 14.5mm, 8F
5-019-115 Straight Shank Straight Flute Chucking Reamer DIN212 15mm, 8F
5-019-117 Straight Shank Straight Flute Chucking Reamer DIN212 15.5mm, 8F
5-019-120 Straight Shank Straight Flute Chucking Reamer DIN212 16mm, 8F
5-019-122 Straight Shank Straight Flute Chucking Reamer DIN212 16.5mm, 8F
5-019-125 Straight Shank Straight Flute Chucking Reamer DIN212 17mm, 8F
5-019-127 Straight Shank Straight Flute Chucking Reamer DIN212 17.5mm, 8F
5-019-130 Straight Shank Straight Flute Chucking Reamer DIN212 18mm, 8F
5-019-132 Straight Shank Straight Flute Chucking Reamer DIN212 18.5mm, 8F
5-019-135 Straight Shank Straight Flute Chucking Reamer DIN212 19mm, 10F
5-019-137 Straight Shank Straight Flute Chucking Reamer DIN212 19.5mm, 10F
5-019-140 Straight Shank Straight Flute Chucking Reamer DIN212 20mm, 10F
5-019-142 Straight Shank Straight Flute Chucking Reamer DIN212 20.5mm, 10F
5-019-145 Straight Shank Straight Flute Chucking Reamer DIN212 21mm, 10F
5-019-147 Straight Shank Straight Flute Chucking Reamer DIN212 21.5mm, 10F
5-019-150 Straight Shank Straight Flute Chucking Reamer DIN212 22mm, 10F
5-019-152 Straight Shank Straight Flute Chucking Reamer DIN212 22.5mm, 10F
5-019-155 Straight Shank Straight Flute Chucking Reamer DIN212 23mm, 10F
5-019-157 Straight Shank Straight Flute Chucking Reamer DIN212 23.5mm, 10F
5-019-160 Straight Shank Straight Flute Chucking Reamer DIN212 24mm, 10F
5-019-162 Straight Shank Straight Flute Chucking Reamer DIN212 24.5mm, 10F
5-019-165 Straight Shank Straight Flute Chucking Reamer DIN212 25mm, 10F
5-020-005 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1/8, 6F
5-020-010 Straight Shank Helical (Spiral) Flute Chucking Reamer, 9/64, 6F
5-020-015 Straight Shank Helical (Spiral) Flute Chucking Reamer, 5/32, 6F
5-020-020 Straight Shank Helical (Spiral) Flute Chucking Reamer, 11/64, 6F
5-020-025 Straight Shank Helical (Spiral) Flute Chucking Reamer, 3/16, 6F
5-020-030 Straight Shank Helical (Spiral) Flute Chucking Reamer, 13/64, 6F
5-020-035 Straight Shank Helical (Spiral) Flute Chucking Reamer, 7/32, 6F
5-020-040 Straight Shank Helical (Spiral) Flute Chucking Reamer, 15/64, 6F
5-020-045 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1/4, 6F
5-020-050 Straight Shank Helical (Spiral) Flute Chucking Reamer, 17/64, 6F
5-020-055 Straight Shank Helical (Spiral) Flute Chucking Reamer, 9/32, 6F
5-020-060 Straight Shank Helical (Spiral) Flute Chucking Reamer, 19/64, 6F
5-020-065 Straight Shank Helical (Spiral) Flute Chucking Reamer, 5/16, 6F
5-020-070 Straight Shank Helical (Spiral) Flute Chucking Reamer, 21/64, 6F
5-020-075 Straight Shank Helical (Spiral) Flute Chucking Reamer, 11/32, 6F
5-020-080 Straight Shank Helical (Spiral) Flute Chucking Reamer, 23/64, 6F
5-020-085 Straight Shank Helical (Spiral) Flute Chucking Reamer, 3/8, 6F
5-020-090 Straight Shank Helical (Spiral) Flute Chucking Reamer, 25/64, 6F
5-020-095 Straight Shank Helical (Spiral) Flute Chucking Reamer, 13/32, 6F
5-020-100 Straight Shank Helical (Spiral) Flute Chucking Reamer, 27/64, 8F
5-020-105 Straight Shank Helical (Spiral) Flute Chucking Reamer, 7/16, 8F
5-020-110 Straight Shank Helical (Spiral) Flute Chucking Reamer, 29/64, 8F
5-020-115 Straight Shank Helical (Spiral) Flute Chucking Reamer, 15/32, 8F
5-020-120 Straight Shank Helical (Spiral) Flute Chucking Reamer, 31/64, 8F
5-020-125 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1/2, 8F
5-020-130 Straight Shank Helical (Spiral) Flute Chucking Reamer, 33/64, 8F
5-020-135 Straight Shank Helical (Spiral) Flute Chucking Reamer, 17/32, 8F
5-020-140 Straight Shank Helical (Spiral) Flute Chucking Reamer, 35/64, 8F
5-020-145 Straight Shank Helical (Spiral) Flute Chucking Reamer, 9/16, 8F
5-020-150 Straight Shank Helical (Spiral) Flute Chucking Reamer, 37/64, 8F
5-020-155 Straight Shank Helical (Spiral) Flute Chucking Reamer, 19/32, 8F
5-020-160 Straight Shank Helical (Spiral) Flute Chucking Reamer, 39/64, 8F
5-020-165 Straight Shank Helical (Spiral) Flute Chucking Reamer, 5/8, 8F
5-020-170 Straight Shank Helical (Spiral) Flute Chucking Reamer, 41/64, 8F
5-020-175 Straight Shank Helical (Spiral) Flute Chucking Reamer, 21/32, 8F
5-020-180 Straight Shank Helical (Spiral) Flute Chucking Reamer, 43/64, 8F
5-020-185 Straight Shank Helical (Spiral) Flute Chucking Reamer, 11/16, 8F
5-020-190 Straight Shank Helical (Spiral) Flute Chucking Reamer, 23/32, 8F
5-020-195 Straight Shank Helical (Spiral) Flute Chucking Reamer, 3/4, 8F
5-020-200 Straight Shank Helical (Spiral) Flute Chucking Reamer, 25/32, 10F
5-020-205 Straight Shank Helical (Spiral) Flute Chucking Reamer, 13/16, 10F
5-020-210 Straight Shank Helical (Spiral) Flute Chucking Reamer, 27/32, 10F
5-020-215 Straight Shank Helical (Spiral) Flute Chucking Reamer, 7/8, 10F
5-020-220 Straight Shank Helical (Spiral) Flute Chucking Reamer, 29/32, 10F
5-020-225 Straight Shank Helical (Spiral) Flute Chucking Reamer, 15/16, 10F
5-020-235 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1, 10F
5-020-238 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.1/32, 10F
5-020-240 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.1/16, 10F
5-020-245 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.1/8, 10F
5-020-250 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.3/16, 12F
5-020-255 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.1/4, 12F
5-020-260 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.5/16, 12F
5-020-265 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.3/8, 12F
5-020-270 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.7/16, 12F
5-020-275 Straight Shank Helical (Spiral) Flute Chucking Reamer, 1.1/2, 12F
5-022-005 Straight Shank Straight Flute Chucking Reamer Cobalt M42 1/8, 6F
5-022-010 Straight Shank Straight Flute Chucking Reamer Cobalt M42 9/64, 6F
5-022-015 Straight Shank Straight Flute Chucking Reamer Cobalt M42 5/32, 6F
5-022-020 Straight Shank Straight Flute Chucking Reamer Cobalt M42 11/64, 6F
5-022-025 Straight Shank Straight Flute Chucking Reamer Cobalt M42 3/16, 6F
5-022-030 Straight Shank Straight Flute Chucking Reamer Cobalt M42 13/64, 6F
5-022-035 Straight Shank Straight Flute Chucking Reamer Cobalt M42 7/32, 6F
5-022-040 Straight Shank Straight Flute Chucking Reamer Cobalt M42 15/64, 6F
5-022-045 Straight Shank Straight Flute Chucking Reamer Cobalt M42 1/4, 6F
5-022-050 Straight Shank Straight Flute Chucking Reamer Cobalt M42 17/64, 6F
5-022-055 Straight Shank Straight Flute Chucking Reamer Cobalt M42 9/32, 6F
5-022-060 Straight Shank Straight Flute Chucking Reamer Cobalt M42 19/64, 6F
5-022-065 Straight Shank Straight Flute Chucking Reamer Cobalt M42 5/16, 6F
5-022-070 Straight Shank Straight Flute Chucking Reamer Cobalt M42 21/64, 6F
5-022-075 Straight Shank Straight Flute Chucking Reamer Cobalt M42 11/32, 6F
5-022-080 Straight Shank Straight Flute Chucking Reamer Cobalt M42 23/64, 6F
5-022-085 Straight Shank Straight Flute Chucking Reamer Cobalt M42 3/8, 6F
5-022-090 Straight Shank Straight Flute Chucking Reamer Cobalt M42 25/64, 6F
5-022-095 Straight Shank Straight Flute Chucking Reamer Cobalt M42 13/32, 6F
5-022-100 Straight Shank Straight Flute Chucking Reamer Cobalt M42 27/64, 8F
5-022-105 Straight Shank Straight Flute Chucking Reamer Cobalt M42 7/16, 8F
5-022-110 Straight Shank Straight Flute Chucking Reamer Cobalt M42 29/64, 8F
5-022-115 Straight Shank Straight Flute Chucking Reamer Cobalt M42 15/32, 8F
5-022-120 Straight Shank Straight Flute Chucking Reamer Cobalt M42 31/64, 8F
5-022-125 Straight Shank Straight Flute Chucking Reamer Cobalt M42 1/2, 8F
5-022-135 Straight Shank Straight Flute Chucking Reamer Cobalt M42 17/32, 8F
5-022-145 Straight Shank Straight Flute Chucking Reamer Cobalt M42 9/16, 8F
5-022-155 Straight Shank Straight Flute Chucking Reamer Cobalt M42 19/32, 8F
5-022-160 Straight Shank Straight Flute Chucking Reamer Cobalt M42 39/64, 8F
5-022-165 Straight Shank Straight Flute Chucking Reamer Cobalt M42 5/8, 8F
5-022-175 Straight Shank Straight Flute Chucking Reamer Cobalt M42 21/32, 8F
5-022-185 Straight Shank Straight Flute Chucking Reamer Cobalt M42 11/16, 8F
5-022-195 Straight Shank Straight Flute Chucking Reamer Cobalt M42 23/32, 8F
5-022-205 Straight Shank Straight Flute Chucking Reamer Cobalt M42 3/4, 8F
5-022-215 Straight Shank Straight Flute Chucking Reamer Cobalt M42 25/32, 10F
5-022-225 Straight Shank Straight Flute Chucking Reamer Cobalt M42 13/16, 10F
5-022-235 Straight Shank Straight Flute Chucking Reamer Cobalt M42 27/32, 10F
5-022-245 Straight Shank Straight Flute Chucking Reamer Cobalt M42 7/8, 10F
5-022-255 Straight Shank Straight Flute Chucking Reamer Cobalt M42 29/32, 10F
5-022-265 Straight Shank Straight Flute Chucking Reamer Cobalt M42 15/16, 10F
5-022-275 Straight Shank Straight Flute Chucking Reamer Cobalt M42 31/32, 10F
5-022-285 Straight Shank Straight Flute Chucking Reamer Cobalt M42 1, 10F
5-025-005 Taper Shank Shank Straight Flute ChuckingReamer, 1/4 MT1, 6F
5-025-010 Taper Shank Shank Straight Flute ChuckingReamer, 9/32 MT1, 6F
5-025-015 Taper Shank Shank Straight Flute ChuckingReamer, 5/16 MT1, 6F
5-025-020 Taper Shank Shank Straight Flute ChuckingReamer, 11/32 MT1, 6F
5-025-025 Taper Shank Shank Straight Flute ChuckingReamer, 3/8 MT1, 6F
5-025-030 Taper Shank Shank Straight Flute ChuckingReamer, 13/32 MT1, 6F
5-025-035 Taper Shank Shank Straight Flute ChuckingReamer, 7/16 MT1, 8F
5-025-040 Taper Shank Shank Straight Flute ChuckingReamer, 15/32 MT1, 8F
5-025-045 Taper Shank Shank Straight Flute ChuckingReamer, 1/2 MT1, 8F
5-025-050 Taper Shank Shank Straight Flute ChuckingReamer, 17/32 MT1, 8F
5-025-055 Taper Shank Shank Straight Flute ChuckingReamer, 9/16 MT1, 8F
5-025-060 Taper Shank Shank Straight Flute ChuckingReamer, 19/32 MT1, 8F
5-025-065 Taper Shank Shank Straight Flute ChuckingReamer, 5/8 MT2, 8F
5-025-070 Taper Shank Shank Straight Flute ChuckingReamer, 21/32 MT2, 8F
5-025-075 Taper Shank Shank Straight Flute ChuckingReamer, 11/16 MT2, 8F
5-025-080 Taper Shank Shank Straight Flute ChuckingReamer, 23/32 MT2, 8F
5-025-085 Taper Shank Shank Straight Flute ChuckingReamer, 3/4 MT2, 8F
5-025-090 Taper Shank Shank Straight Flute ChuckingReamer, 25/32 MT2, 10F
5-025-095 Taper Shank Shank Straight Flute ChuckingReamer, 13/16 MT2, 10F
5-025-100 Taper Shank Shank Straight Flute ChuckingReamer, 27/32 MT2, 10F
5-025-105 Taper Shank Shank Straight Flute ChuckingReamer, 7/8 MT2, 10F
5-025-110 Taper Shank Shank Straight Flute ChuckingReamer, 29/32 MT2, 10F
5-025-115 Taper Shank Shank Straight Flute ChuckingReamer, 15/16 MT3, 10F
5-025-120 Taper Shank Shank Straight Flute ChuckingReamer, 31/32 MT3, 10F
5-025-125 Taper Shank Shank Straight Flute ChuckingReamer, 1in MT3, 10F
5-025-130 Taper Shank Shank Straight Flute ChuckingReamer, 1.1/32 MT3, 10F
5-025-135 Taper Shank Shank Straight Flute ChuckingReamer, 1.1/16 MT3, 10F
5-025-138 Taper Shank Shank Straight Flute ChuckingReamer, 1.3/32 MT3, 10F
5-025-140 Taper Shank Shank Straight Flute ChuckingReamer, 1.1/8 MT3, 10F
5-025-143 Taper Shank Shank Straight Flute ChuckingReamer, 1.5/32 MT3, 10F
5-025-145 Taper Shank Shank Straight Flute ChuckingReamer, 1.3/16 MT3, 10F
5-025-150 Taper Shank Shank Straight Flute ChuckingReamer, 1.1/4 MT4, 12F
5-025-153 Taper Shank Shank Straight Flute ChuckingReamer, 1.9/32 MT4, 12F
5-025-155 Taper Shank Shank Straight Flute ChuckingReamer, 1.5/16 MT4, 12F
5-025-160 Taper Shank Shank Straight Flute ChuckingReamer, 1.3/8 MT4, 12F
5-025-165 Taper Shank Shank Straight Flute ChuckingReamer, 1.7/16 MT4, 12F
5-025-170 Taper Shank Shank Straight Flute ChuckingReamer, 1.1/2 MT4, 12F
5-025-300 Taper Shank Shank Straight Flute ChuckingReamer, 1.9/16 MT4, 12F
5-025-330 Taper Shank Shank Straight Flute ChuckingReamer, 1.5/8 MT4, 12F
5-025-350 Taper Shank Shank Straight Flute ChuckingReamer, 1.11/16 MT4, 12F
5-025-370 Taper Shank Shank Straight Flute ChuckingReamer, 1.3/4 MT4, 12F
5-025-380 Taper Shank Shank Straight Flute ChuckingReamer, 1.7/8 MT4, 12F
5-025-400 Taper Shank Shank Straight Flute ChuckingReamer, 2in MT4, 14F
5-026-005 Taper Shank Shank Straight Flute Chucking Reamer DIN208 5mm MT1, 6F
5-026-010 Taper Shank Shank Straight Flute Chucking Reamer DIN208 6mm MT1, 6F
5-026-015 Taper Shank Shank Straight Flute Chucking Reamer DIN208 7mm MT1, 6F
5-026-020 Taper Shank Shank Straight Flute Chucking Reamer DIN208 8mm MT1, 6F
5-026-025 Taper Shank Shank Straight Flute Chucking Reamer DIN208 9mm MT1, 6F
5-026-030 Taper Shank Shank Straight Flute Chucking Reamer DIN208 10mm MT1, 6F
5-026-035 Taper Shank Shank Straight Flute Chucking Reamer DIN208 11mm MT1, 8F
5-026-040 Taper Shank Shank Straight Flute Chucking Reamer DIN208 12mm MT1, 8F
5-026-045 Taper Shank Shank Straight Flute Chucking Reamer DIN208 13mm MT1, 8F
5-026-050 Taper Shank Shank Straight Flute Chucking Reamer DIN208 14mm MT1, 8F
5-026-055 Taper Shank Shank Straight Flute Chucking Reamer DIN208 15mm MT2, 8F
5-026-060 Taper Shank Shank Straight Flute Chucking Reamer DIN208 16mm MT2, 8F
5-026-065 Taper Shank Shank Straight Flute Chucking Reamer DIN208 17mm MT2, 8F
5-026-070 Taper Shank Shank Straight Flute Chucking Reamer DIN208 18mm MT2, 8F
5-026-075 Taper Shank Shank Straight Flute Chucking Reamer DIN208 19mm MT2, 10F
5-026-080 Taper Shank Shank Straight Flute Chucking Reamer DIN208 20mm MT2, 10F
5-026-085 Taper Shank Shank Straight Flute Chucking Reamer DIN208 21mm MT2, 10F
5-026-090 Taper Shank Shank Straight Flute Chucking Reamer DIN208 22mm MT2, 10F
5-026-095 Taper Shank Shank Straight Flute Chucking Reamer DIN208 23mm MT2, 10F
5-026-100 Taper Shank Shank Straight Flute Chucking Reamer DIN208 24mm MT3, 10F
5-026-105 Taper Shank Shank Straight Flute Chucking Reamer DIN208 25mm MT3, 10F
5-026-110 Taper Shank Shank Straight Flute Chucking Reamer DIN208 26mm MT3, 10F
5-026-115 Taper Shank Shank Straight Flute Chucking Reamer DIN208 27mm MT3, 10F
5-026-120 Taper Shank Shank Straight Flute Chucking Reamer DIN208 28mm MT3, 10F
5-026-125 Taper Shank Shank Straight Flute Chucking Reamer DIN208 29mm MT3, 10F
5-026-130 Taper Shank Shank Straight Flute Chucking Reamer DIN208 30mm MT3, 10F
5-026-135 Taper Shank Shank Straight Flute Chucking Reamer DIN208 31mm MT3, 12F
5-026-140 Taper Shank Shank Straight Flute Chucking Reamer DIN208 32mm MT4, 12F
5-026-145 Taper Shank Shank Straight Flute Chucking Reamer DIN208 33mm MT4, 12F
5-026-150 Taper Shank Shank Straight Flute Chucking Reamer DIN208 34mm MT4, 12F
5-026-155 Taper Shank Shank Straight Flute Chucking Reamer DIN208 35mm MT4, 12F
5-026-160 Taper Shank Shank Straight Flute Chucking Reamer DIN208 36mm MT4, 12F
5-026-165 Taper Shank Shank Straight Flute Chucking Reamer DIN208 37mm MT4, 12F
5-026-170 Taper Shank Shank Straight Flute Chucking Reamer DIN208 38mm MT4, 12F
5-026-175 Taper Shank Shank Straight Flute Chucking Reamer DIN208 40mm MT4, 12F
5-030-005 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1/4 MT1, 6F
5-030-015 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 5/16 MT1, 6F
5-030-020 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 11/32 MT1, 6F
5-030-025 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 3/8 MT1, 6F
5-030-030 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 13/32 MT1, 6F
5-030-035 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 7/16 MT1, 8F
5-030-040 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 15/32 MT1, 8F
5-030-045 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1/2 MT1, 8F
5-030-050 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 17/32 MT1, 8F
5-030-055 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 9/16 MT1, 8F
5-030-060 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 19/32 MT1, 8F
5-030-065 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 5/8 MT2, 8F
5-030-070 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 21/32 MT2, 8F
5-030-075 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 11/16 MT2, 8F
5-030-080 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 23/32 MT2, 8F
5-030-085 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 3/4 MT2, 8F
5-030-090 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 25/32 MT2, 10F
5-030-095 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 13/16 MT2, 10F
5-030-100 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 27/32 MT2, 10F
5-030-105 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 7/8 MT2, 10F
5-030-110 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 29/32 MT2, 10F
5-030-115 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 15/16 MT3, 10F
5-030-120 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 31/32 MT3, 10F
5-030-125 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1in MT3, 10F
5-030-130 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.1/32 MT3, 10F
5-030-135 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.1/16 MT3, 10F
5-030-140 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.1/8 MT3, 10F
5-030-143 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.5/32 MT3, 10F
5-030-145 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.3/16 MT3, 10F
5-030-150 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.1/4 MT4, 12F
5-030-155 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.5/16 MT4, 12F
5-030-160 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.3/8 MT4, 12F
5-030-165 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.7/16 MT4, 12F
5-030-170 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.1/2 MT4, 12F
5-030-300 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.9/16 MT4, 12F
5-030-330 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.5/8 MT4, 12F
5-030-350 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.11/16 MT4, 12F
5-030-370 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.3/4 MT4, 12F
5-030-380 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 1.7/8 MT4, 12F
5-030-400 Taper Shank Shank Helical (Spiral) Flute ChuckingReamer, 2in MT4, 14F

Feature 13


Related Items

Recently Viewed Items

Hello Guest | Log in!
Information
Browse by Category
Browse by Price