Phone: 1-716-791-6197
Fax: 1-716-625-1312
Cart


 

Rotary Table, Horizontal, Vertical Indexing Dividing Heads and Tables Quality ID 769-

Part Number:769-
Rotary Table, Horizontal, Vertical Indexing Dividing Heads and Tables  Quality ID 769-
Rotary Table, Horizontal Vertical Indexing Dividing Heads, Tables

Price

Your Price: $699.99
in stock

Order your item here! -------------Select it in the Box Below

Select Item for Price Information and Ordering
help
*We'll ask for shipping info at checkout

Description

A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. Some rotary tables allow the use of index plates for indexing operations, and some can also be fitted with dividing plates that enable regular work positioning at divisions for which indexing plates are not available. A rotary fixture used in this fashion is more appropriately called a dividing head (indexing head).

Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the workpiece "between centers."

With the table mounted on a secondary table, the workpiece is accurately centered around the rotary table's axis, which in turn is centered around the cutting tool's axis. All three axes are thus coaxial. From this point, the secondary table can be offset in either the X or Y direction to set the cutter the desired distance from the workpiece's center. This allows concentric machining operations on the workpiece. Placing the workpiece eccentrically a set distance from the center permits more complex curves to be cut. As with other setups on a vertical mill, the milling operation can be either drilling a series of concentric, and possibly equidistant holes, or face or end milling either circular or semicircular shapes and contours.
A rotary table can be used:
    To machine spanner flats on a bolt
    To drill equidistant holes on a circular flange
    To cut a round piece with a protruding tang
    To create large-diameter holes, via milling in a circular toolpath, on small milling machines that don't have the power to drive large twist drills (>0.500"/>13 mm)
    To mill helixes
    To cut complex curves (with proper setup)
    to cut straight lines at any angle
    to cut arcs
    with the addition of a compound table on top of the rotary table, the user can move the center of rotation to anywhere on the part being cut. This enables an arc to be cut at any place on the part.
    to cut circular pieces

Additionally, if converted to stepper motor operation, with a CNC milling machine and a tailstock, a rotary table allows many parts to be made on a mill that otherwise would require a lathe
Rotary Table, Horizontal/Vertical Indexing Dividing Heads & Tables
Rotary Table, Horizontal/Veritcal Indexing Dividing Heads & Tables
A summary of items listed in the drop down menu
3501-0003 ***truck only 15 X 10 INCH TILTING TABLE W/ ADJ. HANDLE
3501-0002 10 X 7 INCH TILTING TABLE W/ ADJ. HANDLE
3501-0018 10X12 INCH SWIVEL ANGLE TABLE
3900-1686 3 INCH 2-WAY CROSS SLIDE VISE
3900-2703 3 INCH HEAVY DUTY CROSS SLIDE VISE
3900-1687 4 INCH 2-WAY CROSS SLIDE VISE
3900-2704 4 INCH HEAVY DUTY CROSS SLIDE VISE
3900-1688 5 INCH 2-WAY CROSS SLIDE VISE
3501-0001 5 X 7 INCH TILTING TABLE W/ ADJ. HANDLE
3900-0027 5-1/2 X 12 INCH COMPOUND SLIDE TABLE
3501-0012 5X6 INCH SWIVEL ANGLE TABLE
3900-1689 6 INCH 2-WAY CROSS SLIDE VISE
3900-2706 6 INCH HEAVY DUTY CROSS SLIDE VISE
3501-0014 6X8 INCH SWIVEL ANGLE TABLE
3501-0016 8X10 INCH SWIVEL ANGLE TABLE
3900-2720 PRECISION COMPOUND MILLING TABLE (12 X 7-7/8 INCH)
3900-2332 ** truck only ** 12 INCH HORIZONTAL/VERTICAL ROTARY TABLE-TAIWAN
3900-2330 TRUCK ONLY **10 INCH HORIZONTAL/VERTICAL ROTARY TABLE-TAIWAN
3900-2304 4 INCH HORIZONTAL/VERTICAL ROTARY TABLE see 2314
3900-2314 4 INCH HORIZONTAL/VERTICAL ROTARY TABLE-TAIWAN
3900-2316 6 INCH HORIZONTAL/VERTICAL ROTARY TABLE-TAIWAN
3900-2328 8 INCH HORIZONTAL/VERTICAL ROTARY TABLE-TAIWAN
3900-2407 ADJ TAILSTOCK FOR 4-6 INCH ROTARY TABLES
3900-2409 ADJ TAILSTOCK FOR 6-8 INCH ROTARY TABLES
3900-2411 ADJ TAILSTOCK FOR 8-12 INCH ROTARY TABLES
3900-2403 ADJ. TAILSTOCK FOR 12 INCH ROTARY TABLE
3900-2402 ADJ. TAILSTOCK FOR 8 & 10 INCH ROTARY TABLES
3900-2394 DIVIDING PLATE FOR 10-12 INCH ROTRAY TABLES
3900-2400 DIVIDING PLATE FOR 4- 6 INCH ROTRAY TABLES*USE YS200-1092*
3900-2392 DIVIDING PLATE FOR 8 INCH ROTRAY TABLES
3900-2396 DIVIDING PLATE FOR 8 INCH SUPER SPACER
3900-2390 DIVIDING PLATES FOR 4- 6 INCH ROTRAY TABLES
3900-2358 FLANGE FOR 10 & 12 INCH ROTARY TABLE
3900-2360 FLANGE FOR 12 INCH ROTARY TABLE
3900-2352 FLANGE FOR 6 & 8 INCH ROTARY TABLE
3900-2355 FLANGE FOR 8 & 10 INCH ROTARY TABLE
3900-2406 TAILSTOCK FOR 4 INCH ROTARY TABLE
3900-2414 4 INCH SUPER RAPID INDEXER WITH 3 JAW CHUCK MAXIMUM CLAMPING CAPACITY 4 INCHES
3900-2338 4INCH TILTING ROTARY TABLE
3900-2340 8INCH TILTING ROTARY TABLE
3900-2315 truck only***10 INCH TILTING ROTARY TABLE
3900-2318 truck only***8 INCH STANDARD INDEXING FIXTURE*LIMIT SUPPLY*
3900-2321 truck only***SUPER 8 INCH ROTARY INDEXING FIXTURE-TAIWAN
3800-5812 10 INCH SEMI-UNIVERSAL DIVIDING HEAD SET
3800-5810 7-1/2 INCH SEMI-UNIVERSAL DIVIDING HEAD SET
3800-5815 truck only** 10-1/2 INCH UNIVERSAL DIVIDING HEAD SET
6-999-585 Hex Wrench 5 mm
6-999-586 Hex Wrench 6 mm
6-999-588 Hex Wrench 8 mm
6-999-590 Hex Wrench 10mm
7-540-002 Half Dead Center, MT2, T.I.R. 0.0002in
7-540-003 Half Dead Center, MT3, T.I.R. 0.0002in
7-540-004 Half Dead Center, MT4, T.I.R. 0.0002in
7-609-006 H/V Sup Space w Int Plates, 6in, w Chuck
7-609-008 H/V Sup Space w Int Plates, 8in, w Chuck
7-609-012 H/V Sup Space w Int Plates,12in,Super HD
7-609-016 H/V Sup Space w Int Plates, 6in No Chuck
7-609-018 H/V Sup Space w Int Plates, 8in No Chuck
7-609-022 H/V Sup Space w Int Plates,12in No Chuck
7-609-0308 H/V Sup. Spacer w 4-Jaw 8in Chuck
7-609-0612 Clamping Collar 12in H/V SuperSpacer
7-609-0677 H/V Super Spacer, 6in Set-Tru Adapter
7-609-0709 H/V Super Spacer, 6in Plate, 20T
7-609-0730 H/V Super Spacer, 6in Plate, Soft Blank
7-609-0735 H/V Super Spacer, 8in Plate, 24T
7-609-0751 H/V Super Spacer, 8in Plate, 16T
7-609-0760 H/V Super Spacer, 8in Plate, Soft Blank
7-609-0781 H/V Super Spacer, 12in Plate, 16T
7-609-0790 H/V Super Spacer, 12in Plate, Soft Blank
7-609-945 Bearing Discs 12in H/V SuperSpacer
7-609-946 Bearing 12in H/V SuperSpacer
7-609-947 Bearing 12in H/V SuperSpacer
7-609-948 Bearing Discs 12in H/V SuperSpacer
7-609-949 Bearing 12in H/V SuperSpacer
7-610-104 Tailstock for 4in 5C Index
7-610-106 Tailstock for 6in Index
7-610-108 Tailstock for 8in Index
7-610-112 Tailstock for 12in Index
7-610-506 Face Plate 6in
7-610-508 Face Plate 8in
7-610-512 Face Plate 12in
7-610-5508 Handle for 7-612-004
7-610-806 Tailstock for 6in Adjust
7-610-808 Tailstock for 8in Adjust
7-610-810 Tailstock for 10 & 12in Adjust
7-610-816 Tailstock, Adjustable, f 16in Rot. Table
7-610-9120 Lever #83 for Tailstocks
7-610-9123 Lever #104 for BISON Tailstocks.
7-610-9124 Crank Wheel #100 for BISON Tailstocks
7-613-0907 Handle for S. Spacer 7-609-006
7-613-1208 Click Pin 5842/5820, 8in
7-613-1308 Roller Pin for 8in
7-613-1408 Roller for 8in
7-613-1506 Sleeve for 6, 8 & 12in
7-613-1806 Click Spring for 6in
7-613-1808 Click Spring for 8in
7-613-1906 Brake Spring for 6, 8 & 12in
7-613-2306 Brake Pin for 6in
7-613-3512 Driving Pin 12in
7-613-4406 Driving Handle for 6in
7-613-4412 Driving Handle, Nut & Knob 12in Set
7-621-006 Rotary Table, 6in Plates Included
7-621-0060 Rotary Table, 6in
7-621-008 Rotary Table, 8in Plates Included
7-621-0080 Rotary Table, 8in
7-621-010 Rotary Table, 10in  Plates Included
7-621-0100 Rotary Table, 10in
7-621-012 Rotary Table, 12in  Plates Included
7-621-0120 Rotary Table, 12in
7-621-016 Rotary Table, 16in Plates Included
7-621-0160 Rotary Table, 16in
7-621-020 Rotary Table, 20in Plates Included
7-621-0200 Rotary Table, 20in
7-621-910 Worm Gear for 10" Rotary Table
7-621-912 Worm Gear for 12" Rotary Table
7-621-922 Worm Shaft for 12" Rotary Table
7-622-008 Plates for Rotary Tables, 6in & 8in
7-622-016 Plates f Rotary Tables, 10in, 12in, 16in
7-622-020 Plates f Rotary Tables, 20in
7-630-006 Base Plate, for 6in Chucks
7-630-008 Base Plate, for 8in Chucks
7-630-010 Base Plate, for 10in Chucks
7-630-012 Base Plate, for 12in Chucks
7-630-016 Base Plate, for 16in Chucks
7-630-606 Base Plate, for 6in SET-TRU Chucks
7-630-608 Base Plate, for 8in Set-Thru Chucks
7-630-610 Base Plate, for 10inSet-Thru Chucks
7-630-612 Base Plate, for 12inSet-Thru Chucks
7-630-616 Base Plate, for 16inSet-Thru Chucks
7-640-926 Ratchet Wrench for 6in 4-Jaw SC MchFixt
7-640-930 Ratchet Wrench for 10in 4-Jaw SC MchFixt
7-813-0600 3-Jaw(2Pc) ScrForg, Frnt Mnt, 6in PB
7-813-0800 3-Jaw(2Pc) ScrForg, Frnt Mnt, 8in PB
7-813-1200 3-Jaw(2Pc) ScrForg, Frnt Mnt, 12in PB
7-813-1600 3-Jaw(2Pc) ScrForg, Frnt Mnt,16in PB
7-813-8025 3-Jaw(2pc) 8in Chuck w A2-5 AdapterPlate
7-813-8026 3-Jaw(2pc) 8in Chuck w A2-6 AdapterPlate
7-814-0500 4-Jaw(2Pc) ScrSemi,Frnt Mnt,5in PB
7-814-0600 4-Jaw(2Pc) ScrSemi,Frnt Mnt,6in PB
7-814-0800 4-Jaw(2Pc) ScrSemi,Frnt Mnt,8in PB
7-814-1000 4-Jaw(2Pc) ScrSemi,Frnt Mnt,10in PB
7-814-1200 4-Jaw(2Pc) ScrSemi,Frnt Mnt,12in PB
7-814-1600 4-Jaw(2Pc) ScrSemi,Frnt Mnt,16in PB
7-872-305 Baseplate, Machined, 5in f Scroll Chks
7-872-306 Baseplate, Machined, 6in f Scroll Chks
7-872-308 Baseplate, Machined, 8in f Scroll Chks
7-872-310 Baseplate, Machined, 10in f Scroll Chks
7-872-312 Baseplate, Machined, 12in f Scroll Chks
7-872-316 Baseplate, Machined, 16in f Scroll Chks
7-872-320 Baseplate, Machined, 20in f Scroll Chks
7-872-605 Baseplate, Machined, 5in for Set-Tru
7-872-606 Baseplate, Machined, 6in for Set-Tru
7-872-608 Baseplate, Machined, 8in for Set-Tru
7-872-610 Baseplate, Machined, 10in for Set-Tru
7-872-612 Baseplate, Machined, 12in for Set-Tru
7-872-616 Baseplate, Machined, 16in for Set-Tru
7-872-620 Baseplate, Machined, 20in Set-Tru
7-872-905 Bolt & T-Nut M10 for 5in Baseplate
7-872-906 Bolt & T-Nut M10 for 6 & 8in Baseplate
7-872-910 Bolt & T-Nut M12 for 10 & 12in Baseplate
7-872-932 MT2 Centering Pin for Baseplate
7-872-933 MT3 Centering Pin for Baseplate
7-872-934 MT4 Centering Pin for Baseplate
7-883-406 Hard Top Jaws, 6in, 4-Jaw 4 PcSet
7-883-408 Hard Top Jaws, 8in, 4-Jaw 4 PcSet
7-883-410 Hard Top Jaws, 10in, 4-Jaw 4 PcSet
7-885-406 Hard Master Jaws, 6in 4-Jaw 4 PcSet
7-885-408 Hard Master Jaws, 8in 4-Jaw, 4 Pc Set
7-885-410 Hard Master Jaws, 10in 4-Jaw 4 PcSet
7-886-506 Pinion for 6in. Steel Scroll Chuck
7-886-508 Pinion for 8in Steel Scroll Chuck
7-886-510 Pinion for 10in Steel Scroll Chuck
7-887-506 Scroll Plate for 6in Steel Chuck
7-887-508 Scroll Plate for 8in Steel Chuck
7-887-510 Scroll Plate for 10in Steel Chuck

Related Items

Recently Viewed Items

Hello Guest | Log in!
Information
Browse by Category
Browse by Price