If you are having a problem placing your online order, have questions about your merchandise, or need assistance with something not listed please call us at 1-716-791-6197.

#108-O CARBON REAMER SET (18pc) 3/8-2 31/32- ID: 6599-26800

Part Number: 6599-26800
 #108-O CARBON REAMER SET (18pc) 3/8-2 31/32- ID: 6599-26800
#108-O CARBON REAMER SET (18pc) 3/8-2 31/32- ID: 6599-26800
Your Price: $5,071.41USD
Availability In Stock
#108-O CARBON REAMER SET (18pc) 3/8-2 31/32- ID: 6599-26800
Material: Carbon
Tool Diameter: SET

Ship To:

*Add new shipping info at checkout

#108-O CARBON REAMER SET (18pc) 3/8-2 31/32- ID: 6599-26800

Long Pilot Adjustable Blade Reamers Sizes from .437 to 2.562 Inch Adjustment Range King Pin, Alignment Reamers ID 6599-

ADJUSTABLE REAMERS With their broad adjustment range,
they are very versatile and economical for repair or prototype jobs,
especially when the hole size is determined at the time of assembly.
They are not intended for high production work.

Size adjustment: the blades are held in tapered slots by an adjusting nut on either end.
To adjust, loosen one nut and tighten the other, moving the blades up or down the slot as needed.
Do not over tighten... the slots and threads are easily damaged.
To measure size, adjust to a known size bushing or ring,
or measure across two opposite blades with a micrometer.

A pilot aligns the reamers when two holes must be reamed in line with each other.
Many of our pilots use a floating tapered guide sleeve.

The sleeve is seated in one hole, guiding the reamer as it reams the other hole.

  • Most of the reamers we make are intended for hand use only.
  • Using them with power tools can cause damage to the reamer, the work piece, or yourself!!
  • Select the proper reamer. Adjust the size if needed.
  • Mount the workpiece securely, such as in a vise. Attach a tap wrench to the reamer's square shank. In some cases,
  • it might be easier to mount the reamer to the vice and turn the work piece.
  • Align the reamer with the hole and begin turning (clockwise for right hand cut reamers).
  • Apply even pressure while turning.
  • Generally, using a cutting fluid will improve your surface finish and prolong the life of the reamer.
  • Do not turn the reamer backwards even when removing it from the hole.
  • Don't take to heavy of a cut. .002-.005 per pass is typical, maybe more if reaming easy material.

Related Items

Recently Viewed Items

0 Items
/**/ /* */