If you are having a problem placing your online order, have questions about your merchandise, or need assistance with something not listed please call us at 1-716-791-6197.


1.1281 - 1.1905 x 1.061 Step Reamer- - LH Spiral RH Cut - ID: 2394-348438ST

Part Number: 2394-348438ST
1.1281 - 1.1905 x 1.061 Step Reamer- - LH Spiral RH Cut - ID: 2394-348438ST
Carbide Tipped Step Reamer with Pilot Left Hand Spiral .2841 thru 1.503 Dia Series 3484
Your Price: $574.20USD
Availability In Stock
1.1281 - 1.1905 x 1.061 Step Reamer- - LH Spiral RH Cut - ID: 2394-348438ST
Major Step Diameter: 1.1281 Inch
Minor Step Diameter: 1.1905 Inch
Connection Diameter (Machine Side): 1 Inch
Coating: Uncoated
Material: Carbide-Tipped
Number of Flutes: 8

Ship To:

*Add new shipping info at checkout

1.1281 - 1.1905 x 1.061 Step Reamer- - LH Spiral RH Cut - ID: 2394-348438ST

STEP REAMER TYPE 3484 - STRAIGHT SHANK - LEFT SPIRAL
FLUTE LONG CARBIDE - FOR STEEL
TYPE
Flute long carbide tips brazed to one piece hardened alloy steel bodies.
Left spiral polished flutes.
Available with cutting or non-cutting pilots.
Left spiral flutes should only be used on through holes and very hard materials.
Finishes are much better as spiral flutes
tend to bridge interruptions such as keyways, slots or intersecting holes.
NAS 897 chucking reamers manufactured to
national aerospace standards 897 C with flute long carbide.
Tool geometry and carbide grade appropriate for material being machined.
NOTES:
  1. Order must indicate if pilot is cutting or non-cutting and identify material being machined.
  2. The difference between major and minor diameter shall not exceed 6%,
  3. and must fall within dimensions shown for that particular tool.
  4. Non-cutting pilot diameters may be smaller than cutting diameter range,
  5. but not less than non-cutting pilot minimum diameter dimension shown.
  6. It is recommended that stock removal of 3% be the basis for selecting each cutting diameter.
Below is CDTooling's selection of Step Type Reamers. We offer a wide variety of carbide Tipped and solid carbide cutting tools.
Over 95% are in stock either finished or semi finished for fast delivery.
Shanks are ground to the next smallest shank diameter listed in NAS 897
if tool diameter is within .005" of shank diameter.
Shank diameter tolerance thru 23/32" tool diameter: +.0000"/-.0010".
Shank diameter tolerance over 23/32" tool diameter: +.0000"/-.0015".

Select your item in the box above for the price

1) Select item range in box for each reamer
2) When checking out fill out size in comments
example: .2845 Diameter x .2700 x 1/2 long pilot x 45 degree step
Select EDP Number 348410ST and mark in comments-.2845-2700-500-45

or Call 716 791 6197 and we will be pleased to assist you


MAJOR AND MINOR
CUTTING DIAMETER
RANGE
NON-CUT
PILOT MINIMUM
DIAMETER
MAX
SHANK
DIAMETER
NUMBER
OF
FLUTES
FLUTE
LENGTH
OVER
ALL
LENGTH
EDP
NUMBER

.2841 - .3150 .2670 .2792 4 1 1/2 6 348410ST
.3151 - .3470 .2960 .2792 4 1 1/2 6 348411ST
.3471 - .3780 .3260 .3105 4 1 3/4 7 348412ST
.3781 - .4090 .3550 .3105 4 1 3/4 7 348413ST

.4091 - .4410 .3850 .3730 6 1 3/4 7 348414ST
.4411 - .4720 .4150 .3730 6 1 3/4 7 348415ST
.4721 - .5030 .4440 .4355 6 2
Coating: Uncoated

Related Items

Recently Viewed Items

/**/ /* */