1.3781 - 1.4405 x 1.296 Step Reamer- - LH Spiral RH Cut - ID: 2394-348446ST

Part Number: 2394-348446ST

Your Price: $735.24USD

Availability In Stock

1.3781 - 1.4405 x 1.296 Step Reamer- - LH Spiral RH Cut - ID: 2394-348446ST

Major Step Diameter: 1.3781 Inch

Minor Step Diameter: 1.4405 Inch

Connection Diameter (Machine Side): 1 Inch

Coating: Uncoated

Material: Carbide-Tipped

Number of Flutes: 8

Add name:

*Add new shipping info at checkout

Quantity

1.3781 - 1.4405 x 1.296 Step Reamer- - LH Spiral RH Cut - ID: 2394-348446ST

STEP REAMER TYPE 3484 - STRAIGHT SHANK - LEFT SPIRAL
FLUTE LONG CARBIDE - FOR STEEL

Flute long carbide tips brazed to one piece hardened alloy steel bodies.
Left spiral polished flutes.
Available with cutting or non-cutting pilots.

Left spiral flutes should only be used on through holes and very hard materials.
Finishes are much better as spiral flutes
tend to bridge interruptions such as keyways, slots or intersecting holes.
NAS 897 chucking reamers manufactured to
national aerospace standards 897 C with flute long carbide.
Tool geometry and carbide grade appropriate for material being machined.

NOTES:

Order must indicate if pilot is cutting or non-cutting and identify material being machined.
The difference between major and minor diameter shall not exceed 6%,
and must fall within dimensions shown for that particular tool.
Non-cutting pilot diameters may be smaller than cutting diameter range,
but not less than non-cutting pilot minimum diameter dimension shown.
It is recommended that stock removal of 3% be the basis for selecting each cutting diameter.

Below is CDTooling's selection of Step Type Reamers. We offer a wide variety of carbide Tipped and solid carbide cutting tools.
Over 95% are in stock either finished or semi finished for fast delivery.

Shanks are ground to the next smallest shank diameter listed in NAS 897
if tool diameter is within .005" of shank diameter.
Shank diameter tolerance thru 23/32" tool diameter: +.0000"/-.0010".
Shank diameter tolerance over 23/32" tool diameter: +.0000"/-.0015".

Select your item in the box above for the price

1) Select item range in box for each reamer
2) When checking out fill out size in comments
example: .2845 Diameter x .2700 x 1/2 long pilot x 45 degree step
Select EDP Number 348410ST and mark in comments-.2845-2700-500-45

or Call 716 791 6197 and we will be pleased to assist you
MAJOR AND MINOR CUTTING DIAMETER RANGE	NON-CUT PILOT MINIMUM DIAMETER	MAX SHANK DIAMETER	NUMBER OF FLUTES	FLUTE LENGTH	OVER ALL LENGTH	EDP NUMBER
MAJOR AND MINOR CUTTING DIAMETER RANGE	NON-CUT PILOT MINIMUM DIAMETER	MAX SHANK DIAMETER	NUMBER OF FLUTES	FLUTE LENGTH	OVER ALL LENGTH	EDP NUMBER

.2841 - .3150	.2670	.2792	4	1 ¹/₂	6	348410ST
.3151 - .3470	.2960	.2792	4	1 ¹/₂	6	348411ST
.3471 - .3780	.3260	.3105	4	1 ³/₄	7	348412ST
.3781 - .4090	.3550	.3105	4	1 ³/₄	7	348413ST

.4091 - .4410	.3850	.3730	6	1 ³/₄	7	348414ST
.4411 - .4720	.4150	.3730	6	1 ³/₄	7	348415ST
.4721 - .5030	.4440	.4355	6	2	Coating: Uncoated Material: Carbide-Tipped Number of Flutes: 8 Over all Length(OAL): 12 Inch Flute Length: 3-1/4 Inch Related Items .4721 - .5030 x 0.444 Step Reamer- - LH Spiral RH Cut - ID: 2394-348416ST $335.56USD Availability In Stock Details .5661 - .5970 x 0.532 Step Reamer- - LH Spiral RH Cut - ID: 2394-348419ST $348.48USD Availability In Stock Details .7841 - .8160 x 0.737 Step Reamer- - LH Spiral RH Cut - ID: 2394-348426ST $384.56USD Availability In Stock Details Recently Viewed Items Links Links Terms and Conditions Search Shipping Become an Affiliate Product Index Category Index Advanced Product Search Technical Information CONNECT WITH US Facebook Pinterest Twitter Instagram Copyright CDTooling.com. All Rights Reserved. eCommerce Software by 3dcart. Close Menu Links Categories 0 Items Store Search SearchText /*/ / */

1.3781 - 1.4405 x 1.296 Step Reamer- - LH Spiral RH Cut - ID: 2394-348446ST

Ship To:

1.3781 - 1.4405 x 1.296 Step Reamer- - LH Spiral RH Cut - ID: 2394-348446ST

Related Items

Recently Viewed Items