Phone: 1-716-791-6197
Fax: 1-716-625-1312
Cart


 

Adjustable Blade Reamer Screw on Pilots Assemblies .250, 1/4, 6.3mm to 4.062, 4-1/16, 103.2 mm Size Reamers ID 6601-

Part Number:6601-
Adjustable Blade Reamer Screw on Pilots Assemblies .250, 1/4, 6.3mm to 4.062, 4-1/16, 103.2 mm Size Reamers ID 6601-
Adjustable Blade Reamer Screw on Pilots Assemblies .250, 1/4, 6.3mm to 4.062, 4-1/16, 103.2 mm Size Reamers ID 6601-

Price

Your Price: $35.55
Availabilty In Stock

Order your item here! -------------Select it in the Box Below

See Description Below for Specifications
07040
07050
07060
07070
07080
07090
07100
07190
07200
07210
07220
07230
07240
07250
07260
07270
07280
07290
07300
07310
07320
07330
07340
07350
07360
07370
07500
07510
07520
07530
07540
07550
07560
07570
07560-23 23" Long
07580
07590
07600
07610
07620
07630
07640
07650
07660
07670
26700
26710
26730
help
*We'll ask for shipping info at checkout

Description

Adjustable Blade Reamer Screw on Pilots Assemblies 
.250, 1/4, 6.3mm to 4.062, 4-1/16, 103.2 mm Size Reamers ID 6601-
Adjustable Blade Reamer Screw on Pilots Assemblies .250, 1/4, 6.3mm to 4.062, 4-1/16, 103.2 mm Size Reamers ID 6601-

Feature 6

ADJUSTABLE REAMERS With their broad adjustment range, 
they are very versatile and economical for repair or prototype jobs, 
especially when the hole size is determined at the time of assembly. 
They are not intended for high production work. 

Size adjustment: the blades are held in tapered slots by an adjusting nut on either end.
To adjust, loosen one nut and tighten the other, moving the blades up or down the slot as needed. 
Do not over tighten... the slots and threads are easily damaged. 
To measure size, adjust to a known size bushing or ring, 
or measure across two opposite blades with a micrometer.


PILOT REAMERS 
A pilot aligns the reamers when two holes must be reamed in line with each other. 
Many of our pilots use a floating tapered guide sleeve.

The sleeve is seated in one hole, guiding the reamer as it reams the other hole.



SUGGESTIONS FOR USING HAND REAMERS
  • Most of the reamers we make are intended for hand use only. 
  • Using them with power tools can cause damage to the reamer, the work piece, or yourself!!
  • Select the proper reamer. Adjust the size if needed.
  • Mount the workpiece securely, such as in a vise. Attach a tap wrench to the reamer's square shank. In some cases,
  •  it might be easier to mount the reamer to the vice and turn the work piece.
  • Align the reamer with the hole and begin turning (clockwise for right hand cut reamers).
  •  Apply even pressure while turning. 
  • Generally, using a cutting fluid will improve your surface finish and prolong the life of the reamer.
  • Do not turn the reamer backwards even when removing it from the hole.
  • Don't take to heavy of a cut. .002-.005 per pass is typical, maybe more if reaming easy material.

Related Items

Recently Viewed Items

Hello Guest | Log in!
Information
Browse by Category
Browse by Price