Phone: 1-716-791-6197
Fax: 1-716-625-1312
Menu
Search
Search

If you are having a problem placing your online order, have questions about your merchandise, or need assistance with something not listed please call us at 1-716-791-6197.

  1. Home
  2. Cutting Tools
  3. Carbide Cutting Tools
  4. Carbide Tipped Cutting Tools
  5. Drill Bits
  6. Carbide Tipped Drill Coolant Fed Section
  7. Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-


Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-

Part Number: 1071-
Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-
Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric
Your Price: $189.99USD
Availabilty: In Stock 5-10 days
Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-

Select Size

*

Ship To:

*Add new shipping info at checkout

COOLANT FEEDING DRILLS — CARBIDE TIPPED

CDTooing 2652 — SHORT LENGTH

Coolant Drill — 125º four facet point, self centering.
Shank diameter same size as cutting tip.
Carbide tip high temperature brazed to hardened tool steel bodies with polished straight flutes
Shank coolant hole not tapped.
Tip diameter tolerance +.000, -.001.
Two coolant passages

USE:

Excellent coolant feeding drills for use when very high performance is required.
Excellent hole straightness.
Exceptional hole finish as coolant flushes chips out and away from cutting edges.
High penetration feed rates for shorter drill operation times.
Proven carbide tip point geometry assures long production runs within tolerances

 
Below are the critical dimensions of our Coolant Fed Drills.
Please choose the Drills that meets your tooling needs.
Tool
Diameter		LengthType 2652
EDP NO.		Tool
Diameter
Range*
Frac.Dec.FluteOverall
   1/4  .25002  1/2 4 29/322652160.2490 – 0.2530
  17/64 .26562  3/4 5  5/32265217–
   9/32 .28132  3/4 5  5/322652180.2640 – 0.2840
  19/64 .29693  3/165 19/32265219–
   5/16 .31253  3/165 19/322652200.2950 – 0.3160
  21/64 .32813  7/165 27/32265221–
  11/32 .34383  7/165 27/322652220.3260 – 0.3460
  23/64 .35943  5/8 6  1/32265223–
   3/8  .37503  5/8 6  1/322652240.3540 – 0.3770
  25/64 .39063  7/8 6  9/32265225–
  13/32 .40633  7/8 6  9/322652260.3850 – 0.4080
  27/64 .42194  1/166 15/32265227–
   7/16 .43754  1/166 15/322652280.4100 – 0.4390
  29/64 .45314  5/166 23/32265229–
  15/32 .46884  5/166 23/322652300.4391 – 0.4724
  31/64 .48444  1/2 6 29/32265231–
   1/2  .50004  1/2 6 29/322652320.4725 – 0.5030
  33/64 .51564 13/167  7/32265233–
  17/32 .53134 13/167  7/322652340.5031 – 0.5330
  35/64 .54694 13/167  7/32265235–
   9/16 .56254 13/167  7/322652360.5331 – 0.5650
  37/64 .57815  3/167 19/32265237–
  19/32 .59385  3/167 19/322652380.5651 – 0.5950
  39/64 .60945  3/167 19/32265239–
   5/8  .62505  3/167 19/322652400.5951 – 0.6270
  41/64 .64065  3/167 19/32265241–
  21/32 .65635  3/167 19/322652420.6271 – 0.6570
  43/64 .67195  5/8 8  1/32265243–
  11/16 .68755  5/8 8  1/322652440.6571 – 0.6900
  45/64 .70315  5/8 8  1/32265245–
  23/32 .71885  5/8 8  1/322652460.6901 – 0.7220
  47/64 .73446  1/168 15/32265247–
   3/4  .75006  1/168 15/322652480.7221 – 0.7530
  49/64 .76566  1/168  9/16265249–
  25/32 .78136  1/168  9/162652500.7531 – 0.7840
  13/16 .81256  1/168  9/162652520.7841 – 0.8160
  27/32 .84386  1/2 9        2652540.8161 – 0.8470
   7/8  .87506  1/2 9        2652560.8471 – 0.8780
  29/32 .90636 15/169  7/162652580.8781 – 0.9090
  15/16 .93756 15/169  7/162652600.9091 – 0.9390
  31/32 .96886 15/169  7/162652620.9391 – 0.9700
1        1.00007  3/8 9  7/8 2652640.9701 – 1.0030
* Contact us for modified tool diameter prices.
Don't see the Coolant Fed Drills you need? 
If the above dimensions do not meet your specific Coolant Fed Drills needs we may be able to make modifications to one of the above Coolant Fed Drills or we can quote a full special to your exact requirements.

COOLANT FEEDING DRILLS — CARBIDE TIPPED

SHORT LENGTH — METRIC

CDTooling TYPE 2652 — SHORT LENGTH — METRIC

125° four facet point
Flat relieved, self centering point
Polished straight flutes
Two coolant outlets
Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter.
Shank and tool diameter tolerances: plus .000", minus .001".
Carbide high temperature brazed to hardened tool steel body
Extra long carbide tip for additional regrinds
Straight flutes for superior hole straightness, improved finish and maximum chip capacity.

USE:

For drilling most materials, including some stainless steels.
For intermediate depth holes, 5-8 tool diameters deep

OPTIONS

Modified tool diameter
Modified metric tool diameter
Modified point and / or angle
Flat(s) on shank
Tanged shank

 

METRIC

Diameter are the critical dimensions of our Coolant Fed Drills. Please choose the Drills that meets your tooling needs.
Tool
Diameter		LengthType 2652
EDP NO.		Modified Tool Diameter Range
FluteOverall
mmInchmmInchmmInchLowHigh
6.5 .255964.02  1/2 125.04 29/322652065——
7.0 .275670.02  3/4 131.05  5/3226520706.70607.2140
7.5 .295381.03  3/16142.05 19/3226520757.49308.0260
8.0 .315081.03  3/16142.05 19/322652080——
8.5 .334687.03  7/16148.05 27/3226520858.28008.7880
9.0 .354392.03  5/8 153.06  1/3226520908.99209.5760
9.5 .374092.03  5/8 153.06  1/322652095——
10.0 .393798.03  7/8 159.06  9/3226521009.779010.3630
10.5 .4134103.04  1/16164.06 15/32265210510.414011.1510
11.0 .4331103.04  1/16164.06 15/322652110——
11.5 .4528109.04  5/16171.06 23/32265211511.153012.0000
12.0 .4724109.04  5/16171.06 23/322652120——
12.5 .4921114.04  1/2 175.06 29/32265212512.002012.7760
13.0 .5118122.04 13/16183.07  7/32265213012.779013.5380
13.5 .5315122.04 13/16183.07  7/322652135——
14.0 .5512122.04 13/16183.07  7/32265214013.541014.3510
14.5 .5709131.05  3/16193.07 19/32265214514.354015.1130
15.0 .5906131.05  3/16193.07 19/322652150——
15.5 .6102131.05  3/16193.07 19/32265215515.116015.9260
16.0 .6299131.05  3/16193.07 19/32265216015.928016.6880
16.5 .6496131.05  3/16193.07 19/322652165——
17.0 .6693143.05  5/8 204.08  1/32265217016.690017.5260
17.5 .6890143.05  5/8 204.08  1/322652175——
18.0 .7087143.05  5/8 204.08  1/32265218017.529018.3390
18.5 .7283154.06  1/16215.08 15/32265218518.341019.1260
19.0 .7480154.06  1/16215.08 15/322652190——
19.5 .7677154.06  1/16217.08  9/16265219519.129019.9140
20.0 .7874154.06  1/16217.08  9/16265220019.916020.7260
20.5 .8071154.06  1/16217.08  9/162652205——
21.0 .8268165.06  1/2 229.09        265221020.729021.5140
21.5 .8465165.06  1/2 229.09        2652215——
22.0 .8661165.06  1/2 229.09        265222021.516022.3010
22.5 .8858176.06 15/16240.09  7/16265222522.304023.0890
23.0 .9055176.06 15/16240.09  7/162652230——
23.5 .9252176.06 15/16240.09  7/16265223523.091023.8510
24.0 .9449176.06 15/16240.09  7/16265224023.853024.6380
24.5 .9646176.06 15/16240.09  7/162652245——
25.0 .9843187.07  3/8 251.09  7/8 265225024.641025.4760
* Contact us for modified tool diameter prices
** 6.5mm tool diameter has 6.35mm shank diameter
Don't see the Coolant Fed Drills you need? 
If the above dimensions do not meet your specific Coolant Fed Drills needs we may be able to make modifications to one of the above Coolant Fed Drills or we can quote a full special to your exact requirements.

COOLANT FEEDING DRILLS — CARBIDE TIPPED

LONG LENGTH — 125º SELF CENTERING POINT

CDTooling TYPE 2650 — LONG LENGTH

Coolant Drill — 125º four facet point, self centering.
Shank diameter same size as cutting tip.
Same as type 2652 except longer overall and flute lengths.
Where possible, use shorter length, type 2652, for greater rigidity.
Carbide tip high temperature brazed to hardened tool steel bodies with polished straight flutes.
Shank coolant hole not tapped.
Tip diameter tolerance +.000, -.001.
Two coolant passages.

 
Below are the critical dimensions of our Coolant Fed Drills.
Please choose the Drills that meets your tooling needs.
Tool
Diameter		LengthType 2650
EDP NO.		Tool
Diameter
Range*
Frac.Dec.FluteOverall
   1/4  .25004  5/8 6  1/8 2650160.2490 – 0.2530
  17/64 .26564  3/4 6  1/4 265017–
   9/32 .28134  3/4 6  1/4 2650180.2640 – 0.2840
  19/64 .29694  7/8 6  3/8 265019–
   5/16 .31254  7/8 6  3/8 2650200.2950 – 0.3160
  21/64 .32815        6  1/2 265021–
  11/32 .34385        6  1/2 2650220.3260 – 0.3460
  23/64 .35945  1/4 6  3/4 265023–
   3/8  .37505  1/4 6  3/4 2650240.3540 – 0.3770
  25/64 .39065  1/2 7        265025–
  13/32 .40635  1/2 7        2650260.3850 – 0.4080
  27/64 .42195  3/4 7  1/4 265027–
   7/16 .43755  3/4 7  1/4 2650280.4100 – 0.4390
  29/64 .45315  3/4 7  1/2 265029–
  15/32 .46885  3/4 7  1/2 2650300.4391 – 0.4724
  31/64 .48445  3/4 7  3/4 265031–
   1/2  .50005  3/4 7  3/4 2650320.4725 – 0.5030
  33/64 .51566        8        265033–
  17/32 .53136        8        2650340.5031 – 0.5330
  35/64 .54696  1/4 8  1/4 265035–
   9/16 .56256  1/4 8  1/4 2650360.5331 – 0.5650
  37/64 .57816  3/4 8  3/4 265037–
  19/32 .59386  3/4 8  3/4 2650380.5651 – 0.5950
  39/64 .60946  3/4 8  3/4 265039–
   5/8  .62506  3/4 8  3/4 2650400.5951 – 0.6270
  41/64 .64067        9        265041–
  21/32 .65637        9        2650420.6271 – 0.6570
  43/64 .67197  1/4 9  1/4 265043–
  11/16 .68757  1/4 9  1/4 2650440.6571 – 0.6900
  45/64 .70317  1/2 9  1/2 265045–
  23/32 .71887  1/2 9  1/2 2650460.6901 – 0.7220
  47/64 .73447  3/4 9  3/4 265047–
   3/4  .75007  3/4 9  3/4 2650480.7221 – 0.7530
  49/64 .76567  7/8 9  7/8 265049–
  25/32 .78137  7/8 9  7/8 2650500.7531 – 0.7840
  13/16 .81258        10        2650520.7841 – 0.8160
  27/32 .84388        10        2650540.8161 – 0.8470
   7/8  .87508        10        2650560.8471 – 0.8780
  29/32 .90638        10        2650580.8781 – 0.9090
  15/16 .93758  3/4 10  3/4 2650600.9091 – 0.9390
  31/32 .96889        11        2650620.9391 – 0.9700
1        1.00009        11        2650640.9701 – 1.0030
Don't see the Coolant Fed Drills you need? 
If the above dimensions do not meet your specific Coolant Fed Drills needs we may be able to make modifications to one of the above Coolant Fed Drills or we can quote a full special to your exact requirements.

COOLANT FEEDING DRILLS — CARBIDE TIPPED

LONG LENGTH — 125º SELF CENTERING POINT — METRIC

CDTooling TYPE 2650 — LONG LENGTH — METRIC

Coolant Drill — 125º four facet point, self centering.
Shank diameter same size as cutting tip.
Same as type 2652 except longer overall and flute lengths.
Where possible, use shorter length, type 2652, for greater rigidity.
Carbide tip high temperature brazed to hardened tool steel bodies with polished straight flutes.
Shank coolant hole not tapped.
Tip diameter tolerance +.000, -.001.
Two coolant passages.

 

METRIC DIAMETERS

Below are the critical dimensions of our Coolant Fed Drills.
Please choose the Drills that meets your tooling needs.
Tool
Diameter		LengthType 2650
EDP NO.		Tool
Diameter
Range*
mmInchFluteOverall
6.5 .25594  5/8 6  1/8 2650065–
7.0 .27564  3/4 6  1/4 26500706.7060 – 7.2140
7.5 .29534  7/8 6  3/8 26500757.4930 – 8.0260
8.0 .31504  7/8 6  3/8 2650080–
8.5 .33465        6  1/2 26500858.2800 – 8.7880
9.0 .35435  1/4 6  3/4 26500908.9920 – 9.5760
9.5 .37405  1/4 6  3/4 2650095–
10.0 .39375  1/2 7        26501009.7790 – 10.3630
10.5 .41345  3/4 7  1/4 265010510.4140 – 11.1510
11.0 .43315  3/4 7  1/4 2650110–
11.5 .45285  3/4 7  1/2 265011511.1530 – 12.0000
12.0 .47245  3/4 7  1/2 2650120–
12.5 .49215  3/4 7  3/4 265012512.0020 – 12.7760
13.0 .51186        8        265013012.7790 – 13.5380
13.5 .53156        8        2650135–
14.0 .55126  1/4 8  1/4 265014013.5410 – 14.3510
14.5 .57096  3/4 8  3/4 265014514.3540 – 15.1130
15.0 .59066  3/4 8  3/4 2650150–
15.5 .61026  3/4 8  3/4 265015515.1160 – 15.9260
16.0 .62997        9        265016015.9280 – 16.6880
16.5 .64967        9        2650165–
17.0 .66937  1/4 9  1/4 265017016.6900 – 17.5260
17.5 .68907  1/4 9  1/4 2650175–
18.0 .70877  1/2 9  1/2 265018017.5290 – 18.3390
18.5 .72837  3/4 9  3/4 265018518.3410 – 19.1260
19.0 .74807  3/4 9  3/4 2650190–
19.5 .76777  7/8 9  7/8 265019519.1290 – 19.9140
20.0 .78748        10        265020019.9160 – 20.7260
20.5 .80718        10        2650205–
21.0 .82688        10        265021020.7290 – 21.5140
21.5 .84658        10        2650215–
22.0 .86618        10        265022021.5160 – 22.3010
22.5 .88588        10        265022522.3040 – 23.0890
23.0 .90558        10        2650230–
23.5 .92528  3/4 10  3/4 265023523.0910 – 23.8510
24.0 .94499        11        265024023.8530 – 24.6380
24.5 .96469        11        2650245–
25.0 .98439        11        265025024.6410 – 25.4760
* 6.5mm tool diameter has 6.35mm shank diameter.
Don't see the Coolant Fed Drills you need? 
If the above dimensions do not meet your specific Coolant Fed Drills needs we may be able to make modifications to one of the above Coolant Fed Drills or we can quote a full special to your exact requirements.

COOLANT FEEDING DRILLS — CARBIDE TIPPED

EXTRA LONG LENGTH

CDTooling TYPE 2658 — EXTRA LONG LENGTH

125° four facet point
Flat relieved, self centering point
Polished straight flutes
Two coolant outlets
Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter.
Shank and tool diameter tolerances: plus .000", minus .001".
Carbide high temperature brazed to hardened tool steel body
Extra long carbide tip for additional regrinds
Straight flutes for superior hole straightness, improved finish and maximum chip capacity.

USE:

For drilling most materials, including some stainless steels.
For very deep holes, 12-24 tool diameters deep.

OPTIONS

Modified tool diameter
Modified metric tool diameter
Modified point and / or angle
Flat(s) on shank
Tanged shank

 
Below are the critical dimensions of our Coolant Fed Drills.
Please choose the Drills that meets your tooling needs.
Tool
Diameter		LengthType 2658
EDP NO.		Modified Tool Diameter Range
Frac.Dec.FluteOverallLowHigh
   5/16 .31258        10        265820 .3100 .3160
  11/32 .34388        10        265822 .3281 .3460
   3/8  .37509        11        265824 .3594 .3770
  13/32 .40639        11        265826 .3906 .4080
   7/16 .43759        11        265828 .4200 .4390
  15/32 .46889  3/4 12        265830 .4531 .4710
   1/2  .50009  3/4 12        265832 .4800 .5030
  17/32 .53139  3/4 12        265834 .5118 .5330
   9/16 .562510  3/4 13        265836 .5430 .5650
   5/8  .625010  3/4 13        265840 .6070 .6270
  11/16 .687511  3/4 14        265844 .6693 .6900
   3/4  .750011  3/4 14        265848 .7320 .7530
  13/16 .812512  3/4 15        265852 .7953 .8160
   7/8  .875012  3/4 15        265856 .8570 .8780
  15/16 .937513  3/4 16        265860 .9180 .9390
1        1.000013  3/4 16        265864 .98201.0030
* Contact us for modified tool diameter prices
Don't see the Coolant Fed Drills you need? 
If the above dimensions do not meet your specific Coolant Fed Drills needs we may be able to make modifications
to one of the above Coolant Fed Drills or we can quote a full special to your exact requirements.

Related Items

Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-
Drills Carbide Tipped Coolant Fed Short, Long, Extra Long Inch and Metric ID 1071-
$189.99USD
Availabilty: In Stock 5-10 days
Select Options
Carbide Drill Bits Carbide Tipped Jobber Length Inch and Metric 118 Degree Point
Carbide Drill Bits Carbide Tipped Jobber Length Inch and Metric 118 Degree Point
$15.70USD
In Stock
Select Options
Carbide Drill Bits Carbide Tipped Jobber Length Inch and Metric 135 Degree Point
Carbide Drill Bits Carbide Tipped Jobber Length Inch and Metric 135 Degree Point
$23.60USD
Availabilty In Stock
Select Options

Recently Viewed Items



Copyright CDTooling.com. All Rights Reserved. eCommerce Software by 3dcart.

  • mastercard
  • visa
  • discover
  • amex
  • paypal