Phone: 1-716-791-6197
Fax: 1-716-625-1312
Cart


 

Genuine Critchley Carbon Angle Blade Reamers Size range .421, 27/64, 10.7MM to 4.062, 4-1/16, 103.2 mm Diameter ID 6600-

Part Number:6600-
Genuine Critchley Carbon Angle Blade Reamers Size range .421, 27/64, 10.7MM to 4.062, 4-1/16, 103.2 mm Diameter ID 6600-
Genuine Critchley Carbon Angle Blade Reamers Size range .421, 27/64, 10.7MM to 4.062, 4-1/16, 103.2 mm Diameter ID 6600-

Price

Your Price: $121.31
Availabilty In Stock

Order your item here! -------------Select it in the Box Below

See Description Below for Specifications
00190
00200
00210
00220
00230
00240
00250
00260
00270
00280
00290
00300
00310
00320
00330
00500
00510
00520
00530
00540
00550
00560
00570
00580
00590
00600
00610
00620
00630
00640
00650
00660
00670
04190
04200
04210
04220
04230
04240
04250
04260
04270
04280
04290
04300
04310
04320
04330
04500
04510
04520
04530
04540
04550
04560
04570
04580
04590
04600
04610
04620
04630
04640
04650
04660
04670
05340
05350
05360
05370
01340*
01350*
01360*
01370*
help
*We'll ask for shipping info at checkout

Description

Genuine Critchley Carbon Angle Blade Reamers 
Size range .421, 27/64, 10.7MM to 4.062, 4-1/16, 103.2 mm Diameter ID 6600-
Genuine Critchley Carbon Angle Blade Reamers Size range .421, 27/64, 10.7MM to 4.062, 4-1/16, 103.2 mm Diameter ID 6600-

Feature 6

ADJUSTABLE REAMERS With their broad adjustment range, 
they are very versatile and economical for repair or prototype jobs, 
especially when the hole size is determined at the time of assembly. 
They are not intended for high production work. 

Size adjustment: the blades are held in tapered slots by an adjusting nut on either end.
To adjust, loosen one nut and tighten the other, moving the blades up or down the slot as needed. 
Do not over tighten... the slots and threads are easily damaged. 
To measure size, adjust to a known size bushing or ring, 
or measure across two opposite blades with a micrometer.


PILOT REAMERS 
A pilot aligns the reamers when two holes must be reamed in line with each other. 
Many of our pilots use a floating tapered guide sleeve.

The sleeve is seated in one hole, guiding the reamer as it reams the other hole.



SUGGESTIONS FOR USING HAND REAMERS
  • Most of the reamers we make are intended for hand use only. 
  • Using them with power tools can cause damage to the reamer, the work piece, or yourself!!
  • Select the proper reamer. Adjust the size if needed.
  • Mount the workpiece securely, such as in a vise. Attach a tap wrench to the reamer's square shank. In some cases,
  •  it might be easier to mount the reamer to the vice and turn the work piece.
  • Align the reamer with the hole and begin turning (clockwise for right hand cut reamers).
  •  Apply even pressure while turning. 
  • Generally, using a cutting fluid will improve your surface finish and prolong the life of the reamer.
  • Do not turn the reamer backwards even when removing it from the hole.
  • Don't take to heavy of a cut. .002-.005 per pass is typical, maybe more if reaming easy material.

Related Items

Recently Viewed Items

Hello Guest | Log in!
Information
Browse by Category
Browse by Price