A.N.D 10050 INTEGRAL REAMER PILOT — CARBIDE TIPPED

STRAIGHT SHANK

TYPE 2794 – FOR NON-FERROUS AND CAST IRON

5° axial rake.
Negative radial rake.
Full form relieved cutting edges without O.D. lands provide true form and size for the tool life.
Can be resharpened with a simple face grind.
Heat treated bodies.
All tolerances within military specs.

USE:

In a single operation, a port contour cutter can produce the form and finish required on internal straight thread o-ring ports.

OPTIONS:

Reamer diameter.
Spotface diameter.
Reamer length.
Shank style.
Port ID groove.
Whistle notch.
Tang.
Shank length.
Metric tool diameter.
Weldon flats.

Below are the critical dimensions of our A.N.D. 10050 Integral Reamer Pilot Series Port Contour Cutters.
 Please choose the Port Contour Cutters that meets your tooling needs.

TUBE		DIMENSIONS								TYPE 2794 EDP NO
NO.	SIZE	THREAD SIZE	DIAMETER			LENGTH
			REAMER	SPOTFACE	SHANK	SHANK	REAMER	HEAD	OVERALL
1	1/16	1/4  – 28	.2110	.6500	.5000	2	.4500	1	3	279401
2	1/8	5/16 – 24	.2710	.7420	.5000	2	.6090	1  1/8	3  1/8	279402
3	3/16	3/8  – 24	.3330	.8050	.5000	2	.6090	1  1/4	3  1/4	279403
4	1/4	7/16 – 20	.3860	.8880	.5000	2	.6870	1  1/4	3  1/4	279404
5	5/16	1/2  – 20	.4490	.9500	.5000	2	.6870	1  1/4	3  1/4	279405
6	3/8	9/16 – 18	.5060	1.0120	.5000	2	.7340	1  1/2	3  1/2	279406
8	1/2	3/4  – 16	.6870	1.2400	.7500	2	.8590	1  5/8	3  5/8	279408
10	5/8	7/8  – 14	.8020	1.4150	.7500	2  1/4	.9530	1  7/8	4  1/8	279410
12	3/4	1  1/16 – 12	.9760	1.6650	.7500	2  1/4	1.0930	2  1/8	4  3/8	279412
16	1	1  5/16 – 12	1.2260	1.9650	.7500	2  1/4	1.0930	2  1/8	4  3/8	279416
20	1  1/4	1  5/8  – 12	1.5380	2.3100	1.0000	2  1/4	1.1400	2  1/4	4  1/2	279420
24	1  1/2	1  7/8  – 12	1.7880	2.6000	1.0000	2  1/4	1.1400	2  1/4	4  1/2	279424
28	1  3/4	2  1/4  – 12	2.1630	3.0500	1.0000	2  1/4	1.2650	2  1/4	4  1/2	279428
32	2	2  1/2  – 12	2.4140	3.5200	1.0000	2  1/2	1.3900	2  1/2	5	279432

A.N.D 10050 INTEGRAL REAMER PILOT — CARBIDE TIPPED

STRAIGHT SHANK

TYPE 2795 – FOR STEEL

5° axial rake.
Negative radial rake.
Full form relieved cutting edges without O.D. lands provide true form and size for the tool life.
Can be resharpened with a simple face grind.
Heat treated bodies.
All tolerances within military specs.

USE:

In a single operation, a port contour cutter can produce the form and finish required on internal straight thread o-ring ports.

OPTIONS:

Reamer diameter.
Spotface diameter.
Reamer length.
Shank style.
Port ID groove.
Whistle notch.
Tang.
Shank length.
Metric tool diameter.
Weldon flats.

Below are the critical dimensions of our A.N.D. 10050 Integral Reamer Pilot Series Port Contour Cutters.
Please choose the Port Contour Cutters that meets your tooling needs.

TUBE		DIMENSIONS								TYPE 2795 EDP NO
NO.	SIZE	THREAD SIZE	DIAMETER			LENGTH
			REAMER	SPOTFACE	SHANK	SHANK	REAMER	HEAD	OVERALL
1	1/16	1/4  – 28	.2110	.6500	.5000	2	.4500	1	3	279501
2	1/8	5/16 – 24	.2710	.7420	.5000	2	.6090	1  1/8	3  1/8	279502
3	3/16	3/8  – 24	.3330	.8050	.5000	2	.6090	1  1/4	3  1/4	279503
4	1/4	7/16 – 20	.3860	.8880	.5000	2	.6870	1  1/4	3  1/4	279504
5	5/16	1/2  – 20	.4490	.9500	.5000	2	.6870	1  1/4	3  1/4	279505
6	3/8	9/16 – 18	.5060	1.0120	.5000	2	.7340	1  1/2	3  1/2	279506
8	1/2	3/4  – 16	.6870	1.2400	.7500	2	.8590	1  5/8	3  5/8	279508
10	5/8	7/8  – 14	.8020	1.4150	.7500	2  1/4	.9530	1  7/8	4  1/8	279510
12	3/4	1  1/16 – 12	.9760	1.6650	.7500	2  1/4	1.0930	2  1/8	4  3/8	279512
16	1	1  5/16 – 12	1.2260	1.9650	.7500	2  1/4	1.0930	2  1/8	4  3/8	279516
20	1  1/4	1  5/8  – 12	1.5380	2.3100	1.0000	2  1/4	1.1400	2  1/4	4  1/2	279520
24	1  1/2	1  7/8  – 12	1.7880	2.6000	1.0000	2  1/4	1.1400	2  1/4	4  1/2	279524
28	1  3/4	2  1/4  – 12	2.1630	3.0500	1.0000	2  1/4	1.2650	2  1/4	4  1/2	279528
32	2	2  1/2  – 12	2.4140	3.5200	1.0000	2  1/2	1.3900	2  1/2	5	279532