Tube End Deburring Cutters Sizes from 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel ID 1995

Part Number: 1995-
Tube End Deburring Cutters Sizes from 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel ID 1995
Tube End Deburring Cutters Sizes From 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel
Your Price: $61.94USD
Availabilty In Stock
Tube End Deburring Cutters Sizes from 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel ID 1995

*

Ship To:

*Add new shipping info at checkout
Tube End Deburring Cutters Sizes from 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel

CDTooling Tube End Deburring Cutters The cutting teeth are designed to give a shearing cut. 
They'll curl the fine chips away from the cutter to avoid loading. 
The inside member produces a chamfer of 30° angle with C/L and the outside member 45°. 
The tube end deburring cutters, are intended for light deburring only, and will quickly deburr tubes of most any machinable material. 
They are available in high speed steel and carbide for the tougher and harder materials. 
The tooth arrangement on these cutters has been adopted to cover the widest possible range of most commonly encountered materials. 
Any special material found not to be responsive to our Tube End Deburring Cutters should be given special consideration by our engineers. 
Simple guides such as V-blocks correctly positioned are recommended. 
The Ring or outside member is adjustable for more or less relative chamfer on the outside edge, and is secured after adjustment by socket screws. 
Operating speeds range from 50 to 200 R.P.M. depending on the size of the cutter, material and work condition. 
For heavier deburring, see the Tube End Chamfering Mills. Holding of parts by hand is not recommended.
Tube End Deburring Cutters Sizes from 1/8 to 2-1/2 Diameter, Inside, Outside High Speed Steel ID 1995





















































Related Items

Recently Viewed Items