CAT30, CAT40, CAT45, CAT50, CAT60
ER Collet Chucks CAT 40,ER Collet Chucks CAT 50,End Mill Holders CAT 40,End Mill Holders CAT 50,Milling Chucks CAT 40 and 50,Shell End Mill Holders CAT 40 and 50,Face Mill Holders,Stub Arbor Holders,Semi Flush Slitting Saw Holders,Jacobs Taper Holders CAT 40 and 50,Morse Taper Adapters CAT 40 and 50,CAT 50 to CAT 40 Adapters,Retention knobs,Pull Studs
Tool Holder Tightening Fixtures; Compatible Taper: HSK63A/E/F, BT40, C6, ISO40, CAT40 ID: 647-17846B
$373.99USD
Availability In Stock
$844.20USD
Availability In Stock
$149.00USD
Availabilty: In Stock to 5-10 days
CAT, CV or V-flange Taper
aka: ANSI B5.50, Caterpillar "V-Flange" standard, ISO 7388-1, IS 11173 (TC), DIN 69871, NFE 62540. Units built to the international standards (DIN, ISO and NFE) are commonly considered interchangeable with ANSI (Caterpillar) shanks. However, there are a few differences |
Size | D1 | D2 | D3 | L | F1 | F2 min | A | G |
30 | 1.250 | 1.812 | 1.250 | 1.875 | 0.750 | 1.375 | 0.125 | 1/2-13 |
40 | 1.750 | 2.500 | 1.750 | 2.687 | 0.750 | 1.375 | 0.125 | 5/8-11 |
45 | 2.250 | 3.250 | 2.250 | 3.250 | 0.750 | 1.375 | 0.125 | 3/4-10 |
50 | 2.750 | 3.875 | 2.750 | 4.000 | 0.750 | 1.375 | 0.125 | 1-8 |
60 | 4.250 | 5.500 | 4.250 | 6.375 | 0.750 | 1.500 | 0.125 | 1 1/4-7 |
Size | D1 | D2 | D3 max | L | F1 | F2 min | A | G |
30 | 31.75 | 50 | 45 | 47.8 | 15.9 | 35 | 3.2 | M12 |
40 | 44.45 | 63.55 | 50 | 68.4 | 15.9 | 35 | 3.2 | M16 |
45 | 57.15 | 82.55 | 63 | 82.7 | 15.9 | 35 | 3.2 | M20 |
50 | 69.85 | 97.5 | 80 | 101.75 | 15.9 | 35 | 3.2 | M24 |
