Solid Carbide Router Bit Section

Routers Carbide Fiberglass Routers Fast And Slow Spiral

Featured Products

1/2 Inch Dia x 2 -1/8 Inch LOC X 4 OAL 3089 -52 -706 98318 - ID: 3089-52-706 98318

~~$3,040.00~~ $99.99 Sale

Availability In Stock

Details

Router Bits 0 (1) Flute Solid Carbide

$23.99USD

Availabilty: In Stock

Select Options

Router Bits 2 Flute Carbide Sraight - Up Down Compression Spiral

$39.99USD

Availabilty:In Stock

Select Options

Router Bit 3 Flute Carbide Up Spiral Down Spiral Compression ID 832-

$42.99USD

in stock

Select Options

Router Bits 4 Flute Carbide Up Down Straight Compression Cut id 833-

$49.99USD

in stock

Select Options

SA-3/16 CARBIDE Pilot Die Trimmer 1 x 2-1/2 - Pack of 3 - ID: 3301-310-006995

$454.50USD

Availability In Stock

Details

.7500 3/4 Diameter Three Flute Downcut High Helix Ripper Carbide End Mill Endmill End – Uncoated ID 10027-

$340.00USD

In Stock

Details

.7500 3/4 Diameter Two Flute Upcut Spiral – Plunge Fishtail – Uncoated ID 10029-804-082

$212.99USD

Back Order

Select Options

0.1875 3/16 - 0.250 1/4 Diameter Two Flute Carbide Router Endmill End Left Hand Spiral Left Hand Cut with Router ID 12496-

$28.99USD

Availability In Stock to 15 Work DAYS

Select Options

Single O Flute Upcut Spiral Flute Carbide Router Bit Crescent End 1/16 to 3/8 Diameter Plastic Cutting ID 15283-

$29.99USD

Availability In Stock to 7 days

Select Options

.062x 1/4 LOC UPCUT Carbide Router Bit - For cutting ALUMINUM - ID: 15323-14510

$61.50USD

Availability In Stock

Details

.062 x .005CRNR RAD-2FL - Carbide End Mill FOR PLASTIC - ID: 15325-14620

$45.38USD

Availability In Stock

Details

.031 x .093LOC-2FL - Carbide Ball End Mill FOR PLASTIC - ID: 15326-14312

$53.63USD

Availability In Stock

Details

.031 x .093LOC-2FL - Carbide End Mill FOR PLASTIC - ID: 15327-14112

$46.13USD

Availability In Stock

Details

385223-813-008 3/8 x 1-1/4 x 3 - 3 Flute Solid Carbide Up Cut Spiral for Hard - Soft - Plastic - Wood

$47.99USD

In Stock

Details

0.125 Inch( 1/8) Dia x 0.125 Shank x 1/2 Flute x 1-1/2 OAL - Right Hand Spiral - Style A - No End Cut Burr Router- 7 Flute - Uncoated - Solid Carbide - ID: 494023-26125

$15.06USD

Availability: In Stock

Details

0.125 Inch( 1/8) Dia x 0.125 Shank x 1/2 Flute x 1-1/2 OAL - Right Hand Spiral - Style B - Burr Type End Cut Burr Router- 7 Flute - Uncoated - Solid Carbide - ID: 494023-26126

$16.18USD

Availability: In Stock

Details

0.125 Inch( 1/8) Dia x 0.125 Shank x 1/2 Flute x 1-1/2 OAL - Right Hand Spiral - Style C - End Mill Type End Cu Burr Router- 7 Flute - Uncoated - Solid Carbide - ID: 494023-26127

$16.66USD

Availability: In Stock

Details

0.125 Inch( 1/8) Dia x 0.125 Shank x 1/2 Flute x 1-1/2 OAL - Right Hand Spiral - Style D - 135 Deg Drill Point Burr Router- 7 Flute - Uncoated - Solid Carbide - ID: 494023-26128

$16.84USD

Availability: In Stock

Details

1 2 3 4 5 6 7 Next Page View All

A Router is a tool used to rout out (hollow out) an area in the face of a relatively hard workpiece, typically of wood or plastic. The main application of routers is in woodworking, especially cabinetry.

It was a tool particularly used by pattern makers and staircase makers and consisted of a broad-based wooden hand plane with a narrow blade projecting well beyond its base plate gaining it the nickname Old Woman's Tooth. Although the original hand tool has a few advantages over the power tool equivalent and retains favour with some workers, since about 1960, it has all but been replaced by the modern spindle router, which was designed for the same work, although the first electric hand routers appeared in the years just after World War I.

Further refinement produced the plunge router, invented by ELU (now part of DeWalt) in Germany in the late 1940s. This is even better adapted for many types of work. Today, traditional hand-powered routers are often called router planes. Some workers[1] consider it to be the single most versatile woodworking power tool. Modern routers are often used in place of traditional molding planes or spindle moulder machines for edge decoration (molding) of timber.

Related to the router is a smaller, lighter version designed specifically for trimming laminates. It can be used for smaller general routing work. For example, with an appropriate jig it can be used for recessing door hinges and recessing lock face plates.

A Burr (sometimes called rotary files) are small cutters used in die grinders, rotary tools or dentist's drills. The name may be considered appropriate when their small-sized head (3 mm diameter shaft) is compared to that of a seed of the burr fruit or the teeth compared to a metal burr. To maintain the correct surface speed and cutting conditions they are rotated at the highest speed possible, commensurate with their size and construction. The cutters shown in the image are made from tungsten carbide, which allows them to run at higher speeds than similar HSS cutters, yet still maintain their cutting edges. Burrs (the tools) are also used in CNC machining centers for removing burrs (the small flakes of metal) after a machining process. These tools usually spin at several thousand RPM. Because the cutting edges are so small, they can be touched when spinning by a finger without cutting the skin, which flexes out of the way, although it would not be safe to pinch or grip them from two sides. Hard metal or ceramic workpieces cannot flex beyond the cutting edges, so the tools remove material from them. This characteristic makes them suitable for dentistry, as the tool will grind the hard enamel of teeth, yet leaves soft mouth tissues unharmed if the tool should erroneously touch them.

CDTooing will re-sharpen, repair, re-condition and salvage dull chipped and broken carbide burrs and end mills to new tool tolerances for a fraction of the cost required for replacing them.

CDTooling.com

Solid Carbide Router Bit Section

Featured Products

Products (Total Items: 118)